OneExpert HFC UPG-ONX-630NTX-730-BB ONX-630 to ONX-730 NTX Mainframe Upgrade with Broadband Power Meter

Upgrade package that converts an ONX-630 into a OneExpert HFC ONX-730 NTX with broadband optical power meter, VFL and optical loss mode.

Standard: IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results: Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
10GBase-T RJ-45 Electrical: 100M, 1G, 2.5G, 5G, 10G
SFP+ Optical Ethernet: 1G, 10G (SFP dependent)

Datasheet

Overview

The VIAVI UPG-ONX-630NTX-730-BB is a mainframe upgrade package in the OneExpert HFC (ONX-720/730) family. It moves an existing ONX-630 user to the ONX-730 mainframe with the NTX software package. It also adds a broadband optical power meter, a visual fault locator (VFL) and an optical loss test mode.

The OneExpert HFC validates DOCSIS, Ethernet, PON and WiFi 7 throughput up to 10 Gbps. OneCheck Ethernet, OneCheck WiFi and 10G VIAVI SpeedCheck are included in the package. VIAVI Test Process Automation (TPA) provides one-button guided workflows with pass/fail results, which help technicians follow a consistent process.

Optical testing

The broadband power meter uses an InGaAs photodiode covering 800 to 1650 nm and connects through a UPP 2.5 mm interface. Optical loss mode stores a reference and calculates loss. The 650 nm VFL helps with fiber verification, and USB fiber scopes such as the P5000i and FiberChek Probe are supported with automatic pass/fail analysis.

DOCSIS and RF

The ONX-720/730 continues the RF and DOCSIS testing capabilities of the ONX-620/630 and supports existing ONX DOCSIS/RF modules. The upgrade package ships with a protective fitted case and Cat6A jumpers. An AC charger is not included as standard. The unit uses the same charger as the OneExpert CATV.

Key Features

Upgrade from ONX-630 to the OneExpert HFC ONX-730 mainframe with NTX software package
Broadband optical power meter, 800 to 1650 nm, InGaAs photodiode
Visual fault locator, 650 nm, 1 mW
Optical loss mode with set/clear reference and delta
OneCheck Ethernet and OneCheck WiFi included
VIAVI SpeedCheck to 5 Gbps and 10 Gbps included
Return Signal Generator with Loopback and Ingress Expert included
10GBase-T RJ-45 electrical Ethernet from 100M to 10G
WiFi 7 2x2 testing across 2.4, 5 and 6 GHz bands
Compatible with existing ONX DOCSIS/RF modules
USB optical fiber scope support with pass/fail zone analysis
IP54 rated, drop-tested, modular design
Integrated GPS, StrataSync and VIAVI Mobile Tech app support
Field-replaceable 96 W/hr Li-Ion battery

Specifications

Ethernet

Standard	IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results	Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
10GBase-T RJ-45 Electrical	100M, 1G, 2.5G, 5G, 10G
SFP+ Optical Ethernet	1G, 10G (SFP dependent) Optional
SFP+ Electrical Ethernet	100M, 1G, 2.5G, 5G, 10G Optional

WiFi

OneCheck WiFi (Connected Mode)	WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands
Test Results	Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf)

Throughput/Performance Tests

VIAVI SpeedCheck	5 Gbps, 10 Gbps Standard on this package
Ookla Speedtest	5 Gbps, 10 Gbps Optional
VIAVI TrueSpeed (RFC-6349)	5 Gbps, 10 Gbps Optional
iPerf client	5 Gbps, 10 Gbps Optional
Test Results	Delay, Upstream and Downstream Bit Rates

Bluetooth Communications

Communication Interface	Bluetooth v5.0, BLE 2.0
Smart Device Support	VIAVI Mobile Tech app, Android 8 or newer, iOS12 or newer Recommendation

Optical Fiber Scope Support

USB Optical Fiber Scope	P5000i, FiberChek Probe
Results for Zone Defects	Pass/Fail
Results for Zone Scratches	Pass/Fail
Low Mag Field-of-View (FOV)	Horizontal 740 μm, Vertical 550 μm
High Mag Field-of-View (FOV)	Horizontal 370 μm, Vertical 275 μm
Particle Size Detection	<1 μm
Power Source	USB port

Broadband Power Meter

Photo Diode	InGaAs
Spectral Range	Broadband (800…1650 nm)
Wavelength Setting	850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm; Custom 800…1650 nm, step size 1 nm
Resolution	0.01 dB, 0.001 μW
Measurement Range for Power Level	-65…+10 dBm
Max. Power Level	+16 dBm
Measurement Uncertainty	±0.2 dB/±5% (intrinsic) Under reference conditions: -11 dBm (CW), 1310 nm ±1 nm, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (Single Mode, 9 µm core, 8° APC), when used with SC/PC connectors
Number of Calibrated Wavelengths	8 (850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm)
Tone Detection	270 Hz, 330 Hz, 1 kHz, 2 kHz Future optional capability; received optical power level ≥ -50 dBm
Connection	UPP 2.5 mm

Visual Fault Locator (VFL)

Fiber Compatibility	Single-mode, Multimode
Wavelength	650 nm (visible)
Output Modes	Continuous and flashing
Connector Interface	Universal 2.5 mm (fixed)
Output Power	1 mW
Laser Safety Rating	Class 2
Range (maximum)	7 km VFL range depends on many factors, including fiber quality/loss

Package Features

Fiber Optic Testing	Broadband Power Meter
Optical Loss Mode (Set/clear Ref with Delta)	Included
Return Signal Generator w/Loopback	Included
Ingress Expert	Included
Optional Capabilities	Optical Ethernet Testing over SFP+, OneCheck PON w/Emulation, Ookla Speedtest, VIAVI TrueSpeed, iPerf Speedtest, Smart Access Anywhere, HomeTDR, Home Leakage Test, Reverse Sweepless Sweep, QAM Video MPEG Verification, Field View w/RSG

DOCSIS/RF

Frequency Range	0.5 to 1,218 MHz With compatible ONX DOCSIS/RF module
Frequency Accuracy	±10 ppm typical @25°C
Downstream Max Input Power	60 dBmV total integrated power Port 1
Ingress Spectrum Scan	0.5–204 MHz, calibrated range 4-204 MHz Port 2
Downstream Modulation(s)	64, 128, and 256 QAM, OFDM
OFDM Channels	24-192 MHz wide − up to 3 active OFDM channels
Reverse Sweep Compatibility	SCU-1800 or DAA/RPHY via XperTRAK

General

Size	5.0 x 11.1 x 2.9 in (W x L x H) OneExpert HFC Mainframe Upgrades
Weight	1.94 kg (4.25 lbs) Mainframe Upgrades, without protective case
Operating Temperature Range	Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C
Storage Temperature Range	-20°C to 60°C
Operating Humidity Range	10% to 90% RH, non-condensing
For Indoor/Outdoor Use	IP54 light rain (0.5 in/hr; 1.27 cm/hr)
Drop Rating	1 m (3.3 ft) onto concrete
Operating Altitude	4000 m max
RF immunity	8.5 V/m For CATV measurements
DC Input Power	12 V@5 A
DC Charge Port	2.5 mm barrel
Battery	96 W/hr Li-Ion rechargeable battery, Field replaceable
Battery Charge Time	4 Hrs (90%) 6-8 Hrs 100% (AC charger)
Battery Life	3-5 day typical usage for installation technicians (10 installs a day)
USB Host Port(s)	USB-C, USB-A (USB 3.0)

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

Residential service installation
Small business service activation
Multi-gig DOCSIS service validation
PON and fiber link verification
Ethernet and WiFi 7 throughput testing
Upstream ingress troubleshooting

Included

ONX 730 NTX Package
Broadband Optical Power Meter
VFL
Optical Loss
OneCheck Ethernet
OneCheck WiFi
10G SpeedCheck
Protective Fitted Case
Cat6A jumper M-F and M-M

Options & Accessories

Option	Description
ONXF-SW-SFP-ETH	Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP’s
ONXF-SW-OC-PON	OneCheck PON – PON testing via GPON/XGSPON SFP+
ONXF-SW-OC-GPON-EMUL	GPON Emulation for live service testing on GPON network
ONX-SMART-ACCESS	Smart Access Anywhere
ONXF-SW-OOKLA-SPD-5G	ONX Ookla Speedtest to 5 Gbps
ONXF-SW-OOKLA-SPD-10G	ONX Ookla Speedtest to 10 Gbps
ONXF-SW-TRUESPEED-5G	ONX TrueSpeed to 5 Gbps permanent License
ONXF-SW-TRUESPEED-10G	ONX TrueSpeed to 10 Gbps Permanent License
ONXF-SW-IPERF-5G	ONX iPerf test to 5 Gbps Permanent License
ONXF-SW-IPERF-10G	ONX iPerf test to 10 Gbps permanent License
ONX-CATV-SW-HL-LKG	Home Leakage Software Option
ONX-CATV-SW-HOMETDR	Home TDR Software Option
ONX-CATV-SW-REVSWPLSSWP	Reverse Sweepless Sweep Option for ONX 730’s
ONX-CATV-SW-QAM-VIDEO	QAM Video MPEG Verification Option
ONX-CATV-SW-FV-RSG	PathTrak Fieldview with Return Signal Generator for ONX 730s
NSC-SFP-GPON	GPON SFP for GPON emulation
NSC-SFP-XGSPON	XGSPON SFP+ for XGSPON emulation
NSC-SFP-850-1G-10G	Optical Ethernet SFP + 850 nm SR 1G and 10G
NSC-SFP-1310-1G-10G	Optical Ethernet SFP + 1310 nm LR 1G and 10G
NSC-SFP-1550-1G-10G	Optical Ethernet SFP + 1550 nm ER 1G and 10G
AC-CHARGER	Replacement AC charger (no power cord) — AC charger is not included standard in upgrade packages and can be optionally added
AC-CAR-CHARGER	Car Charger
CC-034601	Large Carrying Case
1019-00-1366	Strand Hook
ONXF-HANDSTRAP	Handstrap for use on unit without a case
ONXF-HFC-BATT-96WHR	Replacement 96 W/Hr Battery
ONXF-CATV-D31-ADAPTR	Module adapter for existing D3.1 modules for ONX-720/730