ONXF-730-BB-85-204-NTX
OneExpert HFC ONXF-730-BB-85-204-NTX DOCSIS 3.1 Tester with Broadband Power Meter, 85/204 MHz NTX Package
ONX-730 handheld with 85/204 MHz DOCSIS 3.1 module, broadband optical power meter, VFL and 10 Gbps Ethernet and WiFi 7 testing.
- Broadband Optical Power Meter
- Standard
- PON Selective Optical Power Meter
- N/A
- TruePON PON-ID Analysis with OLT-ID and Loss
- N/A
- Optical Loss Mode (Set/clear Ref with Delta)
- Standard
Overview
The VIAVI OneExpert HFC ONXF-730-BB-85-204-NTX is a new-unit package of the OneExpert HFC ONX-730 handheld tester. It combines the ONX 730 NTX software package with the ONX-CATV-D31-S-8520-1212 DOCSIS 3.1 module (85/204 MHz upstream, 1.2 GHz/1.2 GHz downstream), a broadband optical power meter, a visual fault locator and the optical loss test mode.
The OneExpert HFC platform validates DOCSIS, Ethernet, PON and WiFi 7 throughput up to 10 Gbps, with the manufacturer stating that a test completes in under a minute. One-button Test Process Automation (OneCheck) runs pass/fail tests for DOCSIS, Ethernet and WiFi and saves geo-tagged results.
Optical tools
The broadband power meter covers 800 to 1650 nm through a dedicated optical port with a universal 2.5 mm connector. The 650 nm visual fault locator and support for USB fiber inspection scopes with Auto Analysis allow fiber connections to be checked on site.
DOCSIS and RF
The ONX-720/730 carries forward the RF and DOCSIS test features of the ONX-620/630 and supports existing RF modules. The NTX configuration includes the Return Signal Generator with Loopback and Ingress Expert. Reverse Sweepless Sweep, QAM video MPEG verification and PathTrak Field View can be added as options.
Design
The unit is IP54 rated, drop-tested and modular, with an upgrade path to 25G/50G PON and DOCSIS 4.0. It has integrated GPS, StrataSync and mobile app support, and a field-replaceable 96 W/hr battery.
Key Features
- Unified OneCheck workflow automating pass/fail for DOCSIS, Ethernet and WiFi
- Ethernet, DOCSIS and WiFi 7 throughput testing up to 10 Gbps
- 10GBase-T RJ-45 electrical Ethernet port supporting 100M to 10G
- WiFi 7 2x2 testing in the 2.4, 5 and 6 GHz bands
- Integrated broadband optical power meter, 800…1650 nm
- Optical loss mode with set/clear reference and delta
- Visual fault locator, 650 nm, 1 mW
- USB fiber scope support with Auto Analysis and defect detection
- ONX-CATV-D31-S-8520-1212 DOCSIS 3.1 module, 85/204 MHz
- Return Signal Generator with Loopback and Ingress Expert included
- Remote coaching and training via PC or mobile connection (Smart Access Anywhere option)
- IP54 rated, drop-tested, modular design
- Upgrade path for 25G/50G PON and DOCSIS 4.0
- Integrated GPS, StrataSync and VIAVI Mobile Tech app support
- Field-replaceable 96 W/hr Li-Ion battery for multi-day use
Specifications
Package Feature Matrix
| Broadband Optical Power Meter | Standard |
|---|---|
| PON Selective Optical Power Meter | N/A |
| TruePON PON-ID Analysis with OLT-ID and Loss | N/A |
| Optical Loss Mode (Set/clear Ref with Delta) | Standard |
| Visual Fault Locator (1 mW) | Standard |
| OneCheck WiFi7 | Standard |
| OneCheck Ethernet | Standard |
| Optical Ethernet Testing over SFP+ | Optional |
| OneCheck PON w/Emulation – GPON/XGS PON using VIAVI SFP | Optional |
| VIAVI SpeedCheck – 5 Gbps / 10 Gbps | Standard |
| Ookla Speedtest – 5 Gbps / 10 Gbps | Optional |
| VIAVI TrueSpeed – 5 Gbps / 10 Gbps | Optional |
| iPerf Speedtest – 5 Gbps / 10 Gbps | Optional |
| Smart Access Anywhere - Remote Connectivity | Optional |
| NTX Software Package | Standard |
| HomeTDR | Optional |
| Home Leakage Test | Optional |
| Return Signal Generator w/Loopback | Standard |
| Reverse Sweepless Sweep | Optional |
| QAM Video MPEG Verification | Optional |
| Ingress Expert | Standard |
| Field View w/RSG | Optional |
| DOCSIS module |
ONX-CATV-D31-S-8520-1212 module (85/204 MHz D3.1)
85/204 MHz Upstream 1.2 GHz/1.2 GHz Downstream DOCSIS 3.1 Packages
|
Ethernet
| Standard | IEEE 802.3 |
|---|---|
| Rates | 100M, 1G, 2.5G, 5G, and 10G Ethernet |
| Test Results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G (SFP dependent)
Optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
WiFi
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test Results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
Throughput/Performance Tests
| TCP Throughput Test | VIAVI SpeedCheck: 5 Gbps, 10 Gbps; Ookla Speedtest: 5 Gbps, 10 Gbps; VIAVI TrueSpeed (RFC-6349): 5 Gbps, 10 Gbps |
|---|---|
| Performance | Up to 10 Gbps for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf client: 5 Gbps, 10 Gbps |
| Test Results | Delay, Upstream and Downstream Bit Rates |
Bluetooth Communications
| Communication Interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart Device Support |
VIAVI Mobile Tech app, Android 8 or newer, iOS12 or newer
Recommendation
|
Optical Fiber Scope Support
| USB Optical Fiber Scope | P5000i, FiberChek Probe |
|---|---|
| Results for Zone Defects | Pass/Fail |
| Results for Zone Scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle Size Detection | <1 μm |
| Power Source | USB port |
Broadband Power Meter
| Photo Diode | InGaAs |
|---|---|
| Spectral Range | Broadband (800…1650 nm) |
| Wavelength Setting | 850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm; Custom 800…1650 nm, step size 1 nm |
| Resolution | 0.01 dB, 0.001 μW |
| Measurement Range for Power Level | -65…+10 dBm |
| Max. Power Level | +16 dBm |
| Measurement Uncertainty |
±0.2 dB/±5% (intrinsic)
Under reference conditions: -11 dBm (CW), 1310 nm ±1 nm, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (Single Mode, 9 µm core, 8° APC), when used with SC/PC connectors
|
| Number of Calibrated Wavelengths | 8 (850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm) |
| Tone Detection |
270 Hz, 330 Hz, 1 kHz, 2 kHz
Future optional capability; received optical power level ≥ -50 dBm; when used with VIAVI Light Source and received optical power level > -50 dBm
|
| Connection | UPP 2.5 mm |
Visual Fault Locator (VFL)
| Fiber Compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output Modes | Continuous and flashing |
| Connector Interface | Universal 2.5 mm (fixed) |
| Controls | On/Off Continuous/Flashing |
| Output Power | 1 mW |
| Laser Safety Rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
General
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
ONX-720 and ONX-730 with RF Module, without protective case
|
| Operating Temperature Range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity Range | 10% to 90% RH, non-condensing |
| For Indoor/Outdoor Use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop Rating | 1 m (3.3 ft) onto concrete |
| Operating Altitude | 4000 m max |
| Pollution | 2° |
| RF immunity |
8.5 V/m
For CATV measurements
|
| DC Input Power | 12 V@5 A |
| DC Charge Port | 2.5 mm barrel |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery Charge Time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery Life |
3-5 day typical usage for installation technicians
10 installs a day
|
| USB Host Port(s) | USB-C, USB-A (USB 3.0) |
DOCSIS/RF – Frequency
| Range | 0.5 to 1,218 MHz |
|---|---|
| Accuracy |
±10 ppm
typical @25°C
|
Downstream Analysis — Port 1
| Max Input Power | 60 dBmV total integrated power |
|---|---|
| Operation on Powered TAP | Operate with up to 90 VAC/DC on input port |
| Power Detection/Notification | Notify of AC/DC power presence on port 1 above 2 Volts |
| Return Loss | >9 dB |
| Auto Channel Plan Builder | Auto detection of channels (analog, digital, QAM, OFDM) |
Upstream Analysis — Port 2
| Ingress Spectrum Scan | 0.5–204 MHz, calibrated range 4-204 MHz |
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min Detectable Level Upstream | −55 dBmV |
| Dynamic Range | 50 dB |
| Max Total Integrated Power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Accuracy |
±2 dB
typical at 25°C
|
| Sampling Rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Return Loss | >9.5 dB |
| Operation on Powered TAP | Operate with up to 90 V AC/DC on input port |
| Power Detection/Notification | Notify of AC/DC power presence on port 2 above 2 Volts |
Analog Channel Measurement
| Video And Audio Levels | Dual |
|---|---|
| Standards | NTSC, PAL, SECAM |
| Min Detectable Signal |
−50 dBmV
single channel
|
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| RBW | 300 kHz |
Downstream Digital Channel Analysis
| Calibrated Power Levels | -20 dBmV to +50 dBmV |
|---|---|
| Level Accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| Annex A | 5.057 to 6.952 MSPS for 64, 128, and 256 QAM |
| Annex B | 5.057 MSPS for 64 QAM and 5.361 MSPS for 256 QAM |
| Annex C | 5.274 MSPS for 64 QAM, and 5.361 MSPS for 256 QAM |
| Regional demods | DVB-C |
| Measurements | Full span MER; Ingress under carrier — full span ingress noise trace; Group delay and in-channel response (ICR); Digital quality index (DQI) over time; Errored/severely errored seconds; Level, measured symbol rate, carrier frequency, modulation, interleaver depth |
OFDM Signal Performance Metrics
| OFDM Channels | 24-192 MHz wide − up to 3 active OFDM channels |
|---|---|
| Level — max, min, average, standard deviation | Relative to a 6 MHz carrier per CableLabs® |
| MER — max, min, average, standard deviation, percentile | 16 to 44 dB |
| MER Channel Band Graph | Max, min, avg across entire OFDM carrier MER per subcarrier |
| ICFR | In-carrier frequency response (dB) |
| Spectrum/IUC | Spectrum display, including carrier and ingress under carrier |
| Profile Analysis | Profiles A, B, C, D, NCP, and PLC (more profiles as implemented); Lock status, code word errors (corrected and uncorrected) |
MER and BER
| MER Specified range |
−5 to +20 dBmV: 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
MER range declines as input levels decrease. Expected MER range at MINLOCK level of –15 dBmV is >30 dB MER.
|
|---|---|
| Max Displayable Range | 50 dB |
| Resolution | 0.1 dB |
| Accuracy |
±2 dB
typical at 25°C
|
| Minimum Lock Level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| BER — OneCheck Mode | Down to 1E-8 (pre and post FEC) Std. 1E-9 user selectable |
| Interleaver Depth | 128, 8 max |
RF Module Input/Outputs
| RF(2) | F connectors replaceable |
|---|---|
| Port 1 | Downstream 54/85/108/258 MHz depending on diplexer |
| Port 2 | Upstream 0.5–204 MHz and TDR |
| Diplexer 85 MHz (Port 1) |
upstream 4-85 MHz; downstream 108-1,218 MHz
Diplexer return path options may not be available on all units
|
| Diplexer 204 MHz (Port 1) |
upstream 4-204 MHz; downstream 258-1,218 MHz
Diplexer return path options may not be available on all units
|
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
Forward and Reverse Sweep
| Forward Sweep Telemetry Frequency | Diplexer dependent 50-1,218 MHz |
|---|---|
| Forward Sweep Input Port | Port 1 |
| Forward Sweep Compatibility | SCU-1800 |
| Reverse Sweep Output Transmit Port | Port 1 or Port 2 (user selectable) |
| Port 1 Sweep Frequency Range | Diplexer dependent 5-42/5-65/5-85/5-204 MHz |
| Port 2 Sweep Frequency Range | 5-204 MHz |
| Reverse Sweep Compatibility | SCU-1800 or DAA/RPHY via XperTRAK |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- DOCSIS service activation
- Multi-gig residential service turn-up
- Small business service testing
- HFC upstream ingress troubleshooting
- Fiber optical power verification
- Ethernet throughput validation
- WiFi 7 service delivery testing
- Forward and reverse sweep of cable plant
Included
- Broadband Optical Power Meter
- VFL
- Optical Loss
- OneCheck Ethernet
- OneCheck WiFi
- 10G SpeedCheck
- ONX-CATV-D31-S-8520-1212 module (85/204 MHz D3.1)
- ONX 730 NTX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP’s |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | GPON Emulation for live service testing on GPON network — Description as printed in the datasheet |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G-1Y | ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-3Y | ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-5Y | ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps |
| ONXF-SW-OOKLA-SPD-10G-1Y | ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-3Y | ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-5Y | ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps |
| ONXF-SW-TRUESPEED-5G-1Y | ONX TrueSpeed to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G-3Y | ONX TrueSpeed to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License |
| ONXF-SW-TRUESPEED-10G-1Y | ONX TrueSpeed to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G-3Y | ONX TrueSpeed to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License |
| ONXF-SW-IPERF-5G-1Y | ONX iPerf test to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G-3Y | ONX iPerf test to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License |
| ONXF-SW-IPERF-10G-1Y | ONX iPerf test to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G-3Y | ONX iPerf test to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-REVSWPLSSWP | Reverse Sweepless Sweep Option for ONX 730’s |
| ONX-CATV-SW-QAM-VIDEO | QAM Video MPEG Verification Option |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert - OneExpert CATV |
| ONX-CATV-SW-FV-RSG | PathTrak Fieldview with Return Signal Generator for ONX 730s |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |
Documents & Resources
Related Products
FiberChek Probe
VIAVI FiberChek Probe Handheld Fiber Inspection Microscope
Handheld all-in-one fiber inspection microscope with touch screen, auto-focus, auto-center and built-in pass/fail end-face analysis.
SCU-1800
VIAVI SCU-1800 Sweep Control Unit for Headend/Hub CATV Forward and Return Sweep
1RU headend/hub sweep control unit with forward sweep to 1,218 MHz and return sweep to 204 MHz on up to 16 ports.