VIAVI OneExpert HFC ONXF-730-BB-42-204-SWX DOCSIS 3.1 and Fiber Field Tester with Broadband Power Meter
OneExpert HFC ONX-730 SWX package with 42/204 MHz DOCSIS 3.1 module, broadband optical power meter, VFL and 10 Gbps service testing.
- Optical testing
- Broadband Optical Power Meter, VFL, Optical Loss
- Service testing
- OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck
- DOCSIS module
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- Software package
- ONX 730 SWX Package
Overview
The VIAVI ONXF-730-BB-42-204-SWX is a new-unit package of the OneExpert HFC (ONX-720/730) platform. It combines the ONX-730 mainframe with the SWX software package, a broadband optical power meter, a visual fault locator, optical loss mode and the ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module for 42/204 MHz upstream and 1.0 GHz/1.2 GHz downstream operation.
The OneExpert HFC validates DOCSIS, Ethernet, PON and WiFi 7 throughput up to 10 Gbps in under a minute. VIAVI Test Process Automation (TPA) provides one-button OneCheck workflows with pass/fail results for Ethernet, WiFi, DOCSIS and PON, intended to improve process compliance and reduce repeat visits.
Optical testing
The broadband optical power meter covers 800 to 1650 nm with eight calibrated wavelengths. A built-in VFL and support for USB fiber scopes with Auto Analysis assist in fiber troubleshooting.
DOCSIS and RF
The ONX-730 retains the RF and DOCSIS test capabilities of the ONX-620/630, including support for existing RF modules, with downstream and OFDM analysis, upstream ingress scanning, and forward and reverse sweep compatibility with the SCU-1800.
Design
The unit is IP54 rated, drop-tested and modular, upgradeable for 25G/50G PON and DOCSIS 4.0, and includes GPS, StrataSync and mobile app support with a field-replaceable 96 Wh battery.
Key Features
- Unified OneCheck workflow automates pass/fail for DOCSIS, Ethernet, WiFi and PON
- OneCheck Ethernet and OneCheck WiFi 7 included
- VIAVI SpeedCheck to 10 Gbps included
- Broadband optical power meter, 800 to 1650 nm
- Optical loss mode with set/clear reference and delta
- Visual fault locator, 1 mW, 650 nm
- Fiber scope support with Auto Analysis for defect detection
- Return Signal Generator with Loopback included
- Ingress Expert included
- ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module (42/204 MHz) included
- Smart Access Anywhere remote coaching and training via PC or mobile (optional)
- IP54 rated, rugged, drop-tested modular design
- Modular path to 25G/50G PON and DOCSIS 4.0
- Integrated GPS, StrataSync and VIAVI Mobile Tech app support
- Field-replaceable 96 W/hr Li-Ion battery for multi-day use
Specifications
| Optical testing | Broadband Optical Power Meter, VFL, Optical Loss |
|---|---|
| Service testing | OneCheck Ethernet, OneCheck WiFi, 10G SpeedCheck |
| DOCSIS module |
ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
42/204 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1 Packages
|
| Software package | ONX 730 SWX Package |
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 Electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ Optical Ethernet |
1G, 10G
SFP dependent; optional
|
| SFP+ Electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
| VIAVI SpeedCheck | 5 Gbps, 10 Gbps |
|---|---|
| Ookla Speedtest |
5 Gbps, 10 Gbps
Optional
|
| VIAVI TrueSpeed (RFC-6349) |
5 Gbps, 10 Gbps
Optional
|
| iPerf client |
5 Gbps, 10 Gbps
Optional
|
| Test results | Delay, Upstream and Downstream Bit Rates |
| Communication interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart device support |
VIAVI Mobile Tech app, Android 8 or newer, iOS 12 or newer
Recommendation
|
| USB optical fiber scope | P5000i, FiberChek Probe |
|---|---|
| Results for zone defects / scratches | Pass/Fail |
| Low Mag Field-of-View (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High Mag Field-of-View (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle size detection | <1 μm |
| Power source | USB port |
| Photo diode | InGaAs |
|---|---|
| Spectral range | Broadband (800…1650 nm) |
| Wavelength setting | 850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm; Custom 800…1650 nm, step size 1 nm |
| Resolution | 0.01 dB, 0.001 μW |
| Measurement range for power level | -65…+10 dBm |
| Max. power level | +16 dBm |
| Measurement uncertainty |
±0.2 dB/±5% (intrinsic)
Under reference conditions: -11 dBm (CW), 1310 nm ±1 nm, 23 °C ±3 K, 45 to 75% relative humidity, SM test fiber (9 µm core, 8° APC), with SC/PC connectors
|
| Number of calibrated wavelengths | 8 (850, 980, 1310, 1490, 1550, 1577, 1625, 1650 nm) |
| Connection | UPP 2.5 mm |
| Fiber compatibility | Single-mode, Multimode |
|---|---|
| Wavelength | 650 nm (visible) |
| Output modes | Continuous and flashing |
| Connector interface | Universal 2.5 mm (fixed) |
| Output power | 1 mW |
| Laser safety rating | Class 2 |
| Range (maximum) |
7 km
VFL range depends on many factors, including fiber quality/loss
|
| Frequency range | 0.5 to 1,218 MHz |
|---|---|
| Frequency accuracy |
±10 ppm
typical @25°C
|
| Downstream max input power |
60 dBmV total integrated power
Port 1
|
| Operation on powered TAP | Operate with up to 90 VAC/DC on input port |
| Downstream return loss | >9 dB |
| Calibrated power levels (digital) | -20 dBmV to +50 dBmV |
| Digital level accuracy |
±1.5 dB from −20 dBmV to +50 dBmV; ±2.0 dB, −20°C to +50°C
±1.5 dB typical at 25°C
|
| Modulations | 64, 128, and 256 QAM, OFDM |
| Analog standards | NTSC, PAL, SECAM |
| Ingress spectrum scan |
0.5–204 MHz, calibrated range 4-204 MHz
Port 2
|
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min detectable level upstream | −55 dBmV |
| Dynamic range | 50 dB |
| Max total integrated power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Sampling rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Upstream return loss | >9.5 dB |
| OFDM channels | 24-192 MHz wide − up to 3 active OFDM channels |
|---|---|
| Profile analysis |
Profiles A, B, C, D, NCP, and PLC
More profiles as implemented
|
| MER specified range |
21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
At −5 to +20 dBmV; MER range declines as input levels decrease
|
| MER resolution | 0.1 dB |
| Minimum lock level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| RF connectors |
F connectors replaceable
RF(2)
|
|---|---|
| Port 2 | Upstream 0.5–204 MHz and TDR |
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
| Forward sweep telemetry frequency |
Diplexer dependent 50-1,218 MHz
Compatible with SCU-1800
|
| Reverse sweep output transmit port | Port 1 or Port 2 (user selectable) |
| Port 2 sweep frequency range | 5-204 MHz |
| Reverse sweep compatibility | SCU-1800 or DAA/RPHY via XperTRAK |
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
With RF Module, without protective case
|
| Operating temperature range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
| Storage temperature range | -20°C to 60°C |
| Operating humidity range | 10% to 90% RH, non-condensing |
| Indoor/outdoor use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop rating | 1 m (3.3 ft) onto concrete |
| Operating altitude | 4000 m max |
| RF immunity |
8.5 V/m
For CATV measurements
|
| DC input power | 12 V@5 A |
| Battery | 96 W/hr Li-Ion rechargeable battery, field replaceable |
| Battery charge time | 4 Hrs (90%) 6-8 Hrs 100% (AC charger) |
| Battery life |
3-5 day typical usage for installation technicians
10 installs a day
|
| USB host ports | USB-C, USB-A (USB 3.0) |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Residential and small business service activation
- Multi-gig DOCSIS service turn-up
- PON and fiber service validation
- Ethernet and WiFi 7 throughput testing
- HFC ingress troubleshooting
- Forward and reverse sweep
Included
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- ONX 730 SWX Package
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP’s |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | GPON Emulation for live service testing on GPON network — Listed as printed in the datasheet |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps — Also available as 1, 3 and 5 Yr timed licenses (-1Y, -3Y, -5Y) deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps — Also available as 1, 3 and 5 Yr timed licenses (-1Y, -3Y, -5Y) deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License — Also available as 1 and 3 Yr timed licenses (-1Y, -3Y) |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-REVSWPLSSWP | Reverse Sweepless Sweep Option for ONX 730’s |
| ONX-CATV-SW-QAM-VIDEO | QAM Video MPEG Verification Option |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert - OneExpert CATV |
| ONX-CATV-SW-FV-RSG | PathTrak Fieldview with Return Signal Generator for ONX 730s |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |