ONXF-720-42-204-IPX
OneExpert HFC ONXF-720-42-204-IPX DOCSIS 3.1 and 10G Service Test Set, 42/204 MHz, IPX Package
OneExpert HFC ONX-720 package with a 42/204 MHz DOCSIS 3.1 module, IPX software, and OneCheck Ethernet and WiFi testing up to 10 Gbps.
- Standard
- IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet
- Test results
- Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps
- 10GBase-T RJ-45 electrical
- 100M, 1G, 2.5G, 5G, 10G
- SFP+ optical Ethernet
- 1G, 10G (SFP dependent)
Overview
The VIAVI ONXF-720-42-204-IPX is a new-unit ordering package of the OneExpert HFC ONX-720 handheld test set. It is configured without optics. It combines the ONX-720 mainframe with the ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module, which covers 42/204 MHz upstream and 1.0 GHz/1.2 GHz downstream, and the ONX-720 IPX software package.
The OneExpert HFC validates DOCSIS, Ethernet and WiFi 7 throughput up to 10 Gbps. VIAVI Test Process Automation (TPA) provides one-button OneCheck workflows with automated pass/fail results. This package includes OneCheck Ethernet, OneCheck WiFi and 10G VIAVI SpeedCheck as standard. Ookla Speedtest, VIAVI TrueSpeed, iPerf, optical Ethernet testing over SFP+ and OneCheck PON with emulation can be added as options.
DOCSIS and RF
The ONX-720/730 continues the RF and DOCSIS test capability of the ONX-620/630 and supports existing RF modules. The RF module provides downstream analysis on port 1 and upstream ingress analysis and TDR on port 2. It also supports OFDM signal performance metrics and profile analysis, and forward and reverse sweep with the SCU-1800.
Platform
The unit is IP54-rated, weatherproof and drop-tested. Its modular design can be upgraded for 25G/50G PON and DOCSIS 4.0. It provides integrated GPS, StrataSync and VIAVI Mobile Tech app support over Bluetooth, and uses a field-replaceable 96 W/hr Li-Ion battery for multi-day use.
Key Features
- OneCheck Ethernet and OneCheck WiFi automated pass/fail workflows included
- VIAVI SpeedCheck to 5 Gbps and 10 Gbps included
- ONX-CATV-D31-S-4220-1012 DOCSIS 3.1 module, 42/204 MHz upstream, 1.0/1.2 GHz downstream
- ONX-720 IPX software package
- 10GBase-T RJ-45 Ethernet testing at 100M, 1G, 2.5G, 5G and 10G
- WiFi 7 2x2 testing on the 2.4, 5 and 6 GHz bands
- Optional optical Ethernet testing over SFP+
- Optional OneCheck PON with GPON/XGS-PON emulation using a VIAVI SFP
- Optional Ookla Speedtest, VIAVI TrueSpeed (RFC-6349) and iPerf to 10 Gbps
- USB fiber scope support with Auto Analysis pass/fail
- IP54 rated, 1 m drop rating onto concrete
- Field-replaceable 96 W/hr Li-Ion battery for 3-5 days of typical installation use
- Integrated GPS, StrataSync and VIAVI Mobile Tech app support
- Modular path to 25G/50G PON and DOCSIS 4.0
- Supports existing ONX DOCSIS/RF modules
Specifications
Ethernet
| Standard | IEEE 802.3 100M, 1G, 2.5G, 5G, and 10G Ethernet |
|---|---|
| Test results | Ethernet Frames, IP Connectivity, Ping, Trace route, Web Connectivity, Speed Test up to 10 Gbps |
| 10GBase-T RJ-45 electrical | 100M, 1G, 2.5G, 5G, 10G |
| SFP+ optical Ethernet |
1G, 10G (SFP dependent)
Optional
|
| SFP+ electrical Ethernet |
100M, 1G, 2.5G, 5G, 10G
Optional
|
WiFi
| OneCheck WiFi (Connected Mode) | WiFi - 7 2x2 (802.11 a/b/g/n/ac/ax/be) 2.4, 5, 6 GHz bands |
|---|---|
| Test results | Signal strength (RSSI), Standard, Width, Max Router PHY Rate, IP/Web connectivity, Throughput Tests (SpeedCheck, Ookla Speedtest, iPerf) |
Throughput/Performance Tests
| TCP throughput test |
VIAVI SpeedCheck: 5 Gbps, 10 Gbps; Ookla Speedtest: 5 Gbps, 10 Gbps; VIAVI TrueSpeed (RFC-6349): 5 Gbps, 10 Gbps
SpeedCheck standard on this package; Ookla Speedtest and TrueSpeed optional
|
|---|---|
| Performance |
Up to 10 Gbps for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf client: 5 Gbps, 10 Gbps
iPerf optional on this package
|
| Test results | Delay, Upstream and Downstream Bit Rates |
Bluetooth Communications
| Communication interface | Bluetooth v5.0, BLE 2.0 |
|---|---|
| Smart device support (recommendation) | VIAVI Mobile Tech app, Android 8 or newer, iOS 12 or newer |
Optical Fiber Scope Support
| USB optical fiber scope | P5000i, FiberChek Probe |
|---|---|
| Results for zone defects | Pass/Fail |
| Results for zone scratches | Pass/Fail |
| Low mag field-of-view (FOV) | Horizontal 740 μm, Vertical 550 μm |
| High mag field-of-view (FOV) | Horizontal 370 μm, Vertical 275 μm |
| Particle size detection | <1 μm |
| Power source | USB port |
General and Physical
| Size |
5.0 x 11.1 x 4.25 in (W x L x H)
ONX-720 and ONX-730 with RF Module
|
|---|---|
| Weight |
3.15 kg (6.9 lb)
ONX-720 and ONX-730 with RF Module, without protective case
|
| DC input power | 12 V@5 A |
| DC charge port | 2.5 mm barrel |
| Battery | 96 W/hr Li-Ion rechargeable battery, Field replaceable |
| Battery charge time |
4 Hrs (90%) 6-8 Hrs 100%
AC charger
|
| Battery life |
3-5 day typical usage for installation technicians
10 installs a day
|
| USB host port(s) | USB-C, USB-A (USB 3.0) |
Environmental
| Operating temperature range | Non-Charging: -10°C to 50°C; Battery Charging: 0°C to 40°C |
|---|---|
| Storage temperature range | -20°C to 60°C |
| Operating humidity range | 10% to 90% RH, non-condensing |
| For indoor/outdoor use | IP54 light rain (0.5 in/hr; 1.27 cm/hr) |
| Drop rating | 1 m (3.3 ft) onto concrete |
| Operating altitude | 4000 m max |
| Pollution | 2° |
| RF immunity |
8.5 V/m
For CATV measurements
|
DOCSIS/RF Module
| Included module |
ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
42/204 MHz Upstream 1.0 GHz/1.2 GHz Downstream DOCSIS 3.1 Packages
|
|---|---|
| RF(2) | F connectors replaceable |
| Port 1 | Downstream 54/85/108/258MHz depending on diplexer |
| Port 2 | Upstream 0.5–204 MHz and TDR |
| Diplexer return path, 42 MHz |
upstream 4-42 MHz; downstream 54–1,004 MHz
Diplexer return path options may not be available on all units
|
| Diplexer return path, 204 MHz |
upstream 4-204 MHz: downstream 258-1,218 MHz
Diplexer return path options may not be available on all units
|
| MoCA filter | All models have MoCA triplexer to filter out MoCA signals below the highest downstream frequency |
Frequency
| Range | 0.5 to 1,218 MHz |
|---|---|
| Accuracy |
±10 ppm
typical @25°C
|
Downstream Analysis — Port 1
| Max input power | 60 dBmV total integrated power |
|---|---|
| Operation on powered TAP | Operate with up to 90 VAC/DC on input port |
| Power detection/notification | Notify of AC/DC power presence on port 1 above 2 Volts |
| Return loss | >9 dB |
| Auto channel plan builder | Auto detection of channels (analog, digital, QAM, OFDM) |
Upstream Analysis — Port 2
| Ingress spectrum scan | 0.5–204 MHz, calibrated range 4-204 MHz |
|---|---|
| Sensitivity | −45 dBmV |
| RBW | 300 kHz |
| Min detectable level upstream | −55 dBmV |
| Dynamic range | 50 dB |
| Max total integrated power | 55 dBmV, 4–10 MHz, 60 dBmV, 10 to 204 MHz |
| Accuracy |
±2 dB
typical at 25°C
|
| Sampling rate | Hyper Spectrum FFT Gapless technology - no missed samples, spans 0.5 to 110 MHz, 110 to 160 MHz, and 160 to 204 MHz |
| Return loss | >9.5 dB |
| Operation on powered TAP | Operate with up to 90 V AC/DC on input port |
| Power detection/notification | Notify of AC/DC power presence on port 2 above 2 Volts |
Analog Channel Measurement
| Video and audio levels | Dual |
|---|---|
| Standards | NTSC, PAL, SECAM |
| Min detectable signal |
−50 dBmV
single channel
|
| Level accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| RBW | 300 kHz |
Downstream Digital Channel Analysis
| Calibrated power levels | -20 dBmV to +50 dBmV |
|---|---|
| Level accuracy | ±1.5 dB from −20 dBmV to +50 dBmV typical at 25°C; ±2.0 dB, −20°C to +50°C |
| Modulation(s) | 64, 128, and 256 QAM, OFDM |
| Annex A | 5.057 to 6.952 MSPS for 64, 128, and 256 QAM |
| Annex B | 5.057 MSPS for 64 QAM and 5.361 MSPS for 256 QAM |
| Annex C | 5.274 MSPS for 64 QAM, and 5.361 MSPS for 256 QAM |
| Regional demods | DVB-C |
| Measurements | Full span MER; Ingress under carrier — full span ingress noise trace; Group delay and in-channel response (ICR); Digital quality index (DQI) overtime; Errored/severely errored seconds; Level, measured symbol rate, carrier frequency, modulation, interleaver depth |
OFDM Signal Performance Metrics
| OFDM channels | 24-192 MHz wide − up to 3 active OFDM channels |
|---|---|
| Level — max, min, average, standard deviation | Relative to a 6 MHz carrier per CableLabs® |
| MER — max, min, average, standard deviation, percentile | 16 to 44 dB |
| MER channel band graph | Max, min, avg across entire OFDM carrier MER per subcarrier |
| ICFR | In-carrier frequency response (dB) |
| Spectrum/IUC | Spectrum display, including carrier and ingress under carrier |
| Profile analysis | Profiles A, B, C, D, NCP, and PLC (more profiles as implemented); Lock status, code word errors (corrected and uncorrected) |
MER and BER
| MER specified range |
−5 to +20 dBmV: 21 to 40 dB, 64 QAM; 28 to 40 dB, 256 QAM; 16 to 44 dB, OFDM
MER range declines as input levels decrease. Expected MER range at MINLOCK level of –15 dBmV is >30 dB MER.
|
|---|---|
| Max displayable range | 50 dB |
| Resolution | 0.1 dB |
| Accuracy |
±2 dB
typical at 25°C
|
| Minimum lock level | −15 dBmV |
| BER — Channel Check and DOCSIS Check mode | Down to 1E-9 (pre and post FEC) |
| BER — OneCheck mode | Down to 1E-8 (pre and post FEC) Std. 1E-9 user selectable |
| Interleaver depth | 128, 8 max |
Sweep
| Forward sweep telemetry frequency | Diplexer dependent 50-1,218 MHz |
|---|---|
| Forward sweep input port | Port 1 |
| Forward sweep compatibility | SCU-1800 |
| Reverse sweep output transmit port | Port 1 or Port 2 (user selectable) |
| Port 1 sweep frequency range | Diplexer dependent 5-42/5-65/5-85/5-204 MHz |
| Port 2 sweep frequency range | 5-204 MHz |
| Reverse sweep compatibility | SCU-1800 or DAA/RPHY via XperTRAK |
Package and Feature Matrix
| Fiber optic testing |
No Optics
Broadband/PON power meters, TruePON, optical loss mode and VFL: N/A
|
|---|---|
| OneCheck WiFi7 | Standard |
| OneCheck Ethernet | Standard |
| VIAVI SpeedCheck – 5 Gbps / 10 Gbps | Standard |
| IPX Software Package | Standard |
| Optional | Optical Ethernet Testing over SFP+; OneCheck PON w/Emulation – GPON/XGS PON using VIAVI SFP; Ookla Speedtest; VIAVI TrueSpeed; iPerf Speedtest; Smart Access Anywhere; HomeTDR; Home Leakage Test; Return Signal Generator w/Loopback; Ingress Expert |
| Not available |
Reverse Sweepless Sweep; QAM Video MPEG Verification; Field View w/RSG
N/A for ONX-720 packages
|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- DOCSIS service installation and activation
- Multi-gig residential service turn-up
- Small business service testing
- Ethernet throughput validation
- WiFi 7 in-home service verification
- Upstream ingress troubleshooting
- HFC forward and reverse sweep
Included
- OneCheck Ethernet
- OneCheck WiFi
- 10G SpeedCheck
- ONX-CATV-D31-S-4220-1012 module (42/204 MHz D3.1)
- ONX-720 IPX Package
- Charger
- Protective Fitted Case
- Cat6A jumper M-F and M-M
Options & Accessories
| Option | Description |
|---|---|
| ONXF-SW-SFP-ETH | Enable SFP+ port for Optical Ethernet testing over VIAVI supported SFP's |
| ONXF-SW-OC-PON | OneCheck PON – PON testing via GPON/XGSPON SFP+ |
| ONXF-SW-OC-GPON-EMUL | GPON Emulation for live service testing on GPON network |
| ONXF-SW-OC-XGSPON-EMUL | XGS-PON emulation option — Datasheet description reads: GPON Emulation for live service testing on GPON network |
| ONX-SMART-ACCESS | Smart Access Anywhere |
| ONXF-SW-OOKLA-SPD-5G-1Y | ONX Ookla Speedtest to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-3Y | ONX Ookla Speedtest to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G-5Y | ONX Ookla Speedtest to 5 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-5G | ONX Ookla Speedtest to 5 Gbps |
| ONXF-SW-OOKLA-SPD-10G-1Y | ONX Ookla Speedtest to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-3Y | ONX Ookla Speedtest to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G-5Y | ONX Ookla Speedtest to 10 Gbps 5 Yr Timed License/deployed via StrataSync |
| ONXF-SW-OOKLA-SPD-10G | ONX Ookla Speedtest to 10 Gbps |
| ONXF-SW-TRUESPEED-5G-1Y | ONX TrueSpeed to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G-3Y | ONX TrueSpeed to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-5G | ONX TrueSpeed to 5 Gbps permanent License |
| ONXF-SW-TRUESPEED-10G-1Y | ONX TrueSpeed to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G-3Y | ONX TrueSpeed to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-TRUESPEED-10G | ONX TrueSpeed to 10 Gbps Permanent License |
| ONXF-SW-IPERF-5G-1Y | ONX iPerf test to 5 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G-3Y | ONX iPerf test to 5 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-5G | ONX iPerf test to 5 Gbps Permanent License |
| ONXF-SW-IPERF-10G-1Y | ONX iPerf test to 10 Gbps 1 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G-3Y | ONX iPerf test to 10 Gbps 3 Yr Timed License/deployed via StrataSync |
| ONXF-SW-IPERF-10G | ONX iPerf test to 10 Gbps permanent License |
| ONX-CATV-SW-HL-LKG | Home Leakage Software Option |
| ONX-CATV-SW-HOMETDR | Home TDR Software Option |
| ONX-CATV-SW-RSG-LOOP | Return Signal Generator with Loopback Option |
| ONX-CATV-SW-INGRESS-EXP | Ingress Expert Option for ONX 720's |
| ONX-CATV-SW-RP-SNR-OCE | Return Path SNR in OneCheck Expert - OneExpert CATV |
| ONX-CATV-FWD-SWEEP | Active Forward Sweep |
| ONX-CATV-REV-SWEEP | Active Reverse Sweep |
| NSC-SFP-GPON | GPON SFP for GPON emulation |
| NSC-SFP-XGSPON | XGSPON SFP+ for XGSPON emulation |
| NSC-SFP-850-1G-10G | Optical Ethernet SFP + 850 nm SR 1G and 10G |
| NSC-SFP-1310-1G-10G | Optical Ethernet SFP + 1310 nm LR 1G and 10G |
| NSC-SFP-1550-1G-10G | Optical Ethernet SFP + 1550 nm ER 1G and 10G |
| AC-CHARGER | Replacement AC charger (no power cord) |
| AC-CAR-CHARGER | Car Charger |
| CC-034601 | Large Carrying Case |
| 1019-00-1366 | Strand Hook |
| ONXF-HANDSTRAP | Handstrap for use on unit without a case |
| ONXF-HFC-BATT-96WHR | Replacement 96 W/Hr Battery |
| ONXF-DISPLAY-PROTECTOR-5P | Replacement screen protector (5 pack) |
| ONXF-ETH-ADAPT-M-F | Ethernet Cat6a M-F adapter 0.5 m |
| NSC-ETHERNET-CABLE | Ethernet Cat6a M-M Patch Cable |
| ONXF-HFC-CASE | Fitted protective case for ONX-720/730 with DOCSIS 3.1 |
Documents & Resources
Related Products
FiberChek Probe
VIAVI FiberChek Probe Handheld Fiber Inspection Microscope
Handheld all-in-one fiber inspection microscope with touch screen, auto-focus, auto-center and built-in pass/fail end-face analysis.
SCU-1800
VIAVI SCU-1800 Sweep Control Unit for Headend/Hub CATV Forward and Return Sweep
1RU headend/hub sweep control unit with forward sweep to 1,218 MHz and return sweep to 204 MHz on up to 16 ports.