VIAVI GEOL-2600 altGNSS GEO-L standalone timing receiver module
VIAVI / Timing and Synchronization / Timing Modules
GEOL-2600

GEOL-2600 Standalone Timing Receiver Module for altGNSS GEO-L SecureTime Service

Compact, low-power receiver module that delivers UTC-traceable timing from the altGNSS GEO-L signal, independent of GNSS.

1 PPS Stability
±100 ns
1 PPS Output
CMOS 3.3 V
Pulse width
200 msec
Cable Delay Compensation
5 ns resolution
Datasheet

Overview

The VIAVI GEOL-2600 is a compact, low-power receiver module that provides access to the altGNSS GEO-L signal, a SecureTime GEO service. It derives UTC-traceable time from secure, one-way transmissions broadcast by geostationary satellites, so it does not depend on GNSS constellations.

The module combines a custom receiver design, a disciplined oscillator and a highly directional antenna. The directional antenna improves rejection of interference and spoofing, which allows reliable reception of the narrowband GEO-L signal. Because the time signal is one-way, no return path is required.

The GEOL-2600 is intended for integration into critical infrastructure and other fixed-location systems with a known position. It helps maintain timing continuity when GNSS signals are unavailable, unreliable or insufficient on their own, in applications such as power distribution, telecom networks, radar installations and secure communications.

Timing is delivered through standard 1 PPS and NMEA interfaces, with a 10 MHz oscillator output. The small form factor and low power draw suit platforms with limited space and strict power budgets. The module is configured and monitored over SCPI serial control, and the GPSCon Controller Software is available for download. VIAVI supports system integration and service activation.

Key Features

  • Enables access to the altGNSS GEO-L signal, a SecureTime GEO service
  • Delivers sub-100 ns target timing accuracy with UTC traceability
  • Operates fully independent of GNSS constellations
  • Uses a directional antenna for enhanced interference and spoofing resistance
  • Receives a secure, one-way time signal with no return path required
  • Compact, low-SWaP design for easy platform integration
  • Includes disciplined oscillator for stable and reliable timing output
  • Standard 1 PPS and NMEA outputs for downstream interface
  • Designed for fixed-location systems with known position
  • Supported by VIAVI for system integration and service activation

Specifications

Pulse Per Second Reference
1 PPS Stability ±100 ns
GEO-L Locked, with SecureTime altGNSS GEO-L subscription
1 PPS Output CMOS 3.3 V
Pulse width 200 msec
Cable Delay Compensation 5 ns resolution
GEO-L Receiver
Sensitivity -100 dBm
Dynamic Range 70 dB
VSWR > 2:1
Antenna Power 3.6 Vdc ±0.1 at 60 mA
Input Power -110 dBm: -80 dBm
Impedance 50 ohms
Power and Consumption
Supply Voltage (Vdd) 3.3 V ±0.15 V
Micro USB Power and Control 3.6 V to 5.5 V
Power Consumption 1.6 W
max during warmup
Temperature
Operating Temperature -20°C ≤ Tc ≤ +85°C
Storage Temperature -55°C ≤ Tc ≤ +95°C
Oscillator
Frequency Output 10 MHz CMOS 3.3V
Stability (over temperature) ±75 ppb
over 0°C to +60°C
Stability vs. supply ±0.2 ppm
Vcc ±2%
Stability vs. load ±0.2 ppm
15 pF ±5% load
Warm Up 0.4 s typical, 3 s max
Output spurs <-110 dBc/Hz
Phase Noise (at 10 MHz)
100 Hz offset -117 dBc/Hz
1 kHz offset -138 dBc/Hz
10 kHz offset -148 dBc/Hz
100 kHz offset -150 dBc/Hz
Connections and Interfaces
RF Antenna Miniature U.Fl coax
+3.3 V Power, 10 MHz out, 1 PPS out, TTL status, TTL serial, ISP/RST 20-pin Samtec, PN: TFM-110-11-H-D
USB Power/Control Micro-USB
1 PPS, 10 MHz External Reference Input Supports optional external 1 PPS and/or 10 MHz reference inputs
Serial Control TTL Status Output, SCPI serial control and monitoring, External CSAC/Rb Oscillator
Serial Ports TTL, USB (9600 to 921,600 baud)
In Situ firmware updates Fully field upgradeable through SCPI serial port
Standards/Compliance Certifications
Certifications CE, UKCA, REACH, RoHS, WEEE
Weight and Dimensions
Width 1.4 in/3.556 cm
Length 2.0 in/5.08 cm
Height 0.5 in/1.27 cm
Weight 0.6 ounce / 17 grams
Ordering Information
Catalog Number 22185032
GEOL-2600 Standalone Timing Receiver Module
Supported SecureTime Service Options Supports SecureTime altGNSS GEO-L

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

  • Power distribution
  • Telecom networks
  • Radar installations
  • Secure communications
  • Critical infrastructure timing
  • Fixed-location systems requiring resilient timing

Options & Accessories

Option Description
22181620 SecureTime altGNSS GEO-L Helical Antenna — GEO-L helical antenna, 1518 to 1559 MHz, right-hand circular polarization, TNC female connector, IP67; lists the µPNT GEOL-2600 (standalone module) as a compatible product

Documents & Resources