MAP mSRC-C2 MSRC-C25000SL-M100-MFA 1550 nm Standard Power SLED Source Module
1550 nm standard power SLED light source module for the VIAVI MAP platform, single-mode fiber with FC/APC connector.
- Center Wavelength
- 1550 nm
- Output Optical Power
- 0 dBm
- Optical Power Stability for 15 min
- ±0.005 dB
- Optical Power Stability for 3 hours
- ±0.005 dB
Overview
The VIAVI MSRC-C25000SL-M100-MFA is a 1550 nm standard power Super-Luminescent Light Emitting Diode (SLED) source module with an individual output on single-mode fiber with an FC/APC connector. It is part of the Multiple Application Platform (MAP) General Purpose Light Source (mSRC-C2) family of stabilized, fiber-coupled, fixed-wavelength emitters.
SLED sources combine the broadband output of LEDs with the higher power of laser sources. The module is TEC stabilized and an internal optical isolator removes interference effects from external reflections. It operates in constant current or constant power mode with at least 10 dB of power tuning range and supports modulation from 0.15 to 2.0 kHz.
Platform
The mSRC is part of the LightDirect module family of the MAP, a modular rack-mountable or benchtop optical test and measurement platform with chassis that host 2, 3 or 8 application modules. The mSRC-C2 is compatible with all current MAP-300 and MAP-200 chassis. The platform is LXI compliant with SCPI-based automation drivers, and a graphical user interface provides summary and detailed views for laboratory or manufacturing use.
Key Features
- 1550 nm standard power SLED source
- Individual output on single-mode fiber with FC/APC connector
- Internal optical isolator to reduce dependence on external reflections
- TEC stabilized for stable output power
- Constant current or constant power operating modes
- Optical power tuning range of at least 10 dB
- Compatible with all current MAP-300 and MAP-200 chassis
Specifications
| Center Wavelength |
1550 nm
Peak wavelength defined as per IEC 61280-1-3 2010 clause 3.1.3; measured at room temperature; after minimum 30 minutes warm-up
|
|---|---|
| Output Optical Power |
0 dBm
Guarantee of 0 dBm excluding connector losses for non-muxed variant
|
| Optical Power Stability for 15 min |
±0.005 dB
Standard power configuration
|
| Optical Power Stability for 3 hours |
±0.005 dB
Standard power configuration
|
| Spectral Ripple (RB = 0.1nm) | 0.2 dB |
| TEC Stabilized | Yes |
| Wavelength Tolerance | ±20 nm |
| Optical Power Tuning Range |
≥ 10 dB
From maximum power down
|
| Power Control Mode | Constant Current or Constant Power |
| Modulation |
0.15 to 2.0 kHz
Modulation duty cycle is fixed at 50%. Modulation depth is fixed at 100%
|
| Modulation Accuracy | ±0.5 Hz |
| Fiber Type | Single Mode Fiber |
| Connector Type | FC/APC |
| Operating Temperature | 10 to 40 °C (50 to 104 °F) |
|---|---|
| Storage Temperature | -30 to 60 °C (-22 to 140 °F) |
| Operating Humidity | Maximum 85% Relative Humidity, non-condensing from 10 to 40 °C/50 to 104 °F |
| Dimensions (W x H x D) | 4.06 x 13.26 x 37.03 cm (1.6 x 5.22 x 14.58 in) |
| Weight | 1.3 kg (2.86 lb) |
| Safety and Standards |
Complies to CE, CSA/ UL/IEC61010-1, LXI Class C requirements, meets the requirements of Class 1M in standard IEC 60825-1 (2014), and complies with 21 CFR 1040.1 except deviations per Laser Notice No. 50
When installed in a MAP chassis
|
|---|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Broadband sources for use with optical spectrum analyzers
- CWDM component measurements
- General purpose and interferometry applications
- Insertion loss testing
- General power sensor or path loss calibration
Options & Accessories
| Option | Description |
|---|---|
| AC500 | FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC501 | FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC502 | FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve |
| AC503 | FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve |
| CleanBlastPRO | CleanBlastPRO fiber end-face cleaning system — Fiber end-face cleaning system for removing dirt and debris from connectors |
| FiberChek | FiberChek probe microscope — One-button handheld fiber inspection probe |
| P5000i | P5000i fiber microscope — Automated Fiber Inspection & Analysis Probe with PASS/FAIL capability |
