MAP mSRC-C2 MSRC-C23456SL-M100-MFA 1310/1490/1550/1625 nm Standard Power SLED Source Module

Standard power SLED source module for the VIAVI MAP platform with individual 1310, 1490, 1550 and 1625 nm single-mode FC/APC outputs.

Center Wavelength: 1310/1490/1550/1625 nm
Wavelength Tolerance: ±20 nm
Spectral Width (FWHM): > 20 nm; > 30 nm
Output Optical Power: 0 dBm

Datasheet

Overview

The MSRC-C23456SL-M100-MFA is a standard power Super-Luminescent Light Emitting Diode (SLED) source module in the VIAVI Multiple Application Platform (MAP) General Purpose Light Source (mSRC-C2) family. It provides four individual outputs at 1310, 1490, 1550 and 1625 nm on single-mode fiber with FC/APC connectors.

SLED sources combine the broadband output of LEDs with the higher power of laser sources. The modules are TEC stabilized and can operate in constant current or constant power mode, with at least 10 dB of optical power tuning range from maximum power down. Internal optical isolators reduce sensitivity to external reflections.

Platform

The mSRC is part of the LightDirect module family of the MAP platform, a modular rack-mount or benchtop optical test system with chassis hosting 2, 3 or 8 application modules. The mSRC-C2 is compatible with all current MAP-300 and MAP-200 chassis. The platform is LXI compliant, with SCPI-based automation drivers, PC-based management tools and a web-enabled multiuser graphical interface offering summary and detailed views.

Key Features

Standard power SLED sources at 1310, 1490, 1550 and 1625 nm
Individual output per wavelength
Internal optical isolator to reduce dependence on external reflections
TEC stabilized with temperature and power feedback control
Constant current or constant power operating modes
At least 10 dB optical power tuning range
Modulation from 0.15 to 2.0 kHz
Single-mode fiber with FC/APC connectors
Compatible with all current MAP-300 and MAP-200 chassis

Specifications

Optical

Center Wavelength	1310/1490/1550/1625 nm Individual outputs; defined as per IEC 61280-1-3 2010 clause 3.1.3, measured at room temperature
Wavelength Tolerance	±20 nm
Spectral Width (FWHM)	> 20 nm; > 30 nm Depends on wavelength; per-wavelength assignment not given in the extracted text. Measured with a resolution bandwidth of 0.06 nm
Output Optical Power	0 dBm Individual (non-muxed) wavelengths; guarantee of 0 dBm excluding connector losses for non-muxed variant
Optical Power Stability for 15 min	±0.005 dB; ±0.01 dB Standard power SLED values as listed across configurations; ±0.005 dB stated for standard power configuration
Optical Power Stability for 3 hours	±0.005 dB; ±0.01 dB Standard power SLED values as listed across configurations
Spectral Ripple (RB = 0.1nm)	0.2 dB
TEC Stabilized	Yes
Optical Power Tuning Range	≥ 10 dB From maximum power down
Power Control Mode	Constant Current or Constant Power
Modulation	0.15 to 2.0 kHz Modulation duty cycle is fixed at 50%. Modulation depth is fixed at 100%
Modulation Accuracy	±0.5 Hz
Fiber Type	Single Mode Fiber
Connector Type	FC/APC
Measurement Conditions	All measurements taken after a minimum of 30 minutes warm-up time

General

Operating Temperature	10 to 40 °C (50 to 104 °F)
Storage Temperature	-30 to 60 °C (-22 to 140 °F)
Operating Humidity	Maximum 85% Relative Humidity, non-condensing from 10 to 40 °C/50 to 104 °F
Dimensions (W x H x D)	4.06 x 13.26 x 37.03 cm (1.6 x 5.22 x 14.58 in)
Weight	1.3 kg (2.86 lb)
Compliance	CE, CSA/ UL/IEC61010-1, LXI Class C; Class 1M per IEC 60825-1 (2014); 21 CFR 1040.1 except deviations per Laser Notice No. 50 When installed in a MAP chassis
Chassis Compatibility	All current MAP-300 and MAP-200 chassis

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

Broadband sources for use with optical spectrum analyzers
CWDM component measurements
General purpose and interferometry applications
Insertion loss testing
General power sensor or path loss calibration

Options & Accessories

Option	Description
CleanBlastPRO	CleanBlast fiber end-face cleaning system — Optional inspection and cleaning tool for removing dirt and debris from connectors
FiberChek	FiberChek probe microscope — One-button handheld fiber inspection probe
P5000i	P5000i fiber microscope — Automated Fiber Inspection & Analysis Probe with PASS/FAIL capability
AC500	FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve
AC501	FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve
AC502	FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve
AC503	FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve