VIAVI MAP mSRC-C2 MSRC-C23000HS-M100-MFA High Power 1310 nm SLED Source Module

Single-output high power 1310 nm SLED light source module for the VIAVI MAP platform, with ≥ 10 dBm output and FC/APC connector.

Center Wavelength: 1310 nm
Spectral Width (FWHM): < 60 nm
Output Optical Power: ≥ 10 dBm
Optical Power Stability for 15 min: ±0.01 dB

Datasheet

Overview

The VIAVI MSRC-C23000HS-M100-MFA is a single-output, high power 1310 nm Super-Luminescent Light Emitting Diode (SLED) source module in the Multiple Application Platform (MAP) General Purpose Light Source (mSRC-C2) family. The mSRC-C2 family consists of stabilized, fiber-coupled, fixed-wavelength emitters covering key telecom and datacom wavelength bands, sharing a common interface for FP laser, LED and SLED sources.

SLED sources combine the broadband output of LEDs with the higher output power of laser sources. The high power SLED configuration is specified for a power stability of ±0.01 dB, and internal optical isolators reduce interference effects from external reflections. The module operates in constant current or constant power mode, is TEC stabilized and delivers its output through single mode fiber with an FC/APC connector.

Platform

The mSRC is part of the LightDirect module family of the MAP platform, a modular rack-mountable or benchtop optical test and measurement system with chassis that host 2, 3 or 8 application modules. The platform is LXI compliant, with SCPI-based automation drivers, PC-based management tools and a web-enabled multiuser interface. The mSRC-C2 is compatible with all current MAP-300 and MAP-200 chassis.

Key Features

Single 1310 nm high power SLED output
Output optical power ≥ 10 dBm
Optical power stability of ±0.01 dB over 15 minutes
Internal optical isolator to reduce dependence on external reflections
Constant current or constant power control mode
TEC stabilized emitter
Modulation from 0.15 to 2 kHz with 1 Hz setting resolution
Single mode fiber output with FC/APC connector
Compatible with all current MAP-300 and MAP-200 chassis
Complies with CE, CSA/UL/IEC61010-1 and LXI Class C requirements when installed in a MAP chassis
Class 1M laser product per IEC 60825-1 (2014)

Specifications

Optical Parameters

Center Wavelength	1310 nm Defined as per IEC 61280-1-3 2010 clause 8.2; all measurements after a minimum of 30 minutes warm-up time
Spectral Width (FWHM)	< 60 nm Measured at constant temperature of 23±5°C, at full power
Output Optical Power	≥ 10 dBm Measured at constant temperature of 23±5°C, at full power
Optical Power Stability for 15 min	±0.01 dB Measured at constant temperature of 23±5°C, at full power
Spectral Ripple (RB = 0.1nm)	0.40 dB
Optical Power Tuning Range	≥ 10 dBm Unit as printed in the datasheet
Wavelength Tolerance	±10 nm
TEC Stabilized	Yes
Power Control Mode	Constant Current or Constant Power

Modulation

Modulation	0.15 to 2 kHz
Modulation Setting Resolution	1 Hz
Modulation Accuracy	±0.5 Hz

Optical Interface

Fiber Type	Single Mode Fiber
Connector Type	FC/APC

General

Operating Temperature	10 to 40 °C (50 to 104 °F)
Storage Temperature	-30 to 60 °C (-22 to 140 °F)
Operating Humidity	Maximum 85% Relative Humidity, non-condensing from 10 to 40 °C/50 to 104 °F
Dimensions (W x H x D)	4.06 x 13.26 x 37.03 cm (1.6 x 5.22 x 14.58 in)
Weight	1.3 kg (2.86 lb)

Compliance

Safety and Standards	Complies to CE, CSA/ UL/IEC61010-1, LXI Class C requirements, meets the requirements of Class 1M in standard IEC 60825-1 (2014), and complies with 21 CFR 1040.1 except deviations per Laser Notice No. 50 When installed in a MAP chassis

Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.

Applications

Broadband sources for use with optical spectrum analyzers
CWDM component measurements
General purpose and interferometry applications
Insertion loss testing
General power sensor or path loss calibration

Options & Accessories

Option	Description
CleanBlastPRO	CleanBlast fiber end-face cleaning system — Inspection and cleaning tool for removing dirt and debris from connectors in most common applications.
FiberChek	FiberChek probe microscope — One-button handheld fiber inspection probe.
P5000i	P5000i fiber microscope — Automated Fiber Inspection & Analysis Probe with PASS/FAIL capability for PC, laptops, mobile devices and VIAVI test solutions.
AC500	FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve
AC501	FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve
AC502	FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve
AC503	FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve