VIAVI MAP mSRC-C2 MSRC-C21308FPX-M101-MFP 850/1310 nm Multimode Multiplexed Fabry-Perot Laser Source Module
Multimode MAP light source module with multiplexed 850/1310 nm Fabry-Perot lasers on a single 50 µm FC/PC output with IEC-compliant launch conditions.
- Peak Wavelength
- 850/1310 nm Muxed
- Spectral Width (FWHM)
- < 5 nm
- Optical Launch Conditions
- IEC 62614 Ed 1.0 July 2010
- Output Optical Power (850 nm)
- ≥ -11dBm
Overview
The MSRC-C21308FPX-M101-MFP is a member of the VIAVI Multiple Application Platform (MAP) general purpose light source family (mSRC-C2). It combines 850 nm and 1310 nm Fabry-Perot (FP) lasers into a single multiplexed output on 50 µm multimode fiber with encircled-flux (EF) compliant launch conditions and FC/PC connectors.
Fabry-Perot lasers emit light at commonly used discrete wavelengths, with a spectral width in the region of 5 nm and a high output power level. The multimode versions of the FP module are uncooled basic FP lasers with a fixed output power, operated in constant current mode, and are intended for loss measurements on multimode components and links where controlled launch conditions are required.
Platform
The mSRC is part of the LightDirect module family of the MAP platform, a modular, rack-mountable or benchtop optical test and measurement system with chassis that host 2, 3 or 8 application modules. The mSRC-C2 is compatible with all current MAP-300 and MAP-200 chassis. Control is available through a web-enabled multiuser interface and LXI-compliant SCPI automation drivers, and the graphical user interface offers summary and detailed module views for laboratory and manufacturing use.
Key Features
- Multiplexed 850 nm and 1310 nm Fabry-Perot laser outputs on a single connector
- 50 µm multimode fiber output with EF compliant launch conditions
- Optical launch conditions per IEC 62614 Ed 1.0 July 2010
- Modulation from 0.15 to 2.0 kHz with 1 Hz setting resolution
- FC/PC connector
- Compatible with all current MAP-300 and MAP-200 chassis
- LXI compliant with SCPI based automation drivers
Specifications
| Peak Wavelength |
850/1310 nm Muxed
Peak wavelength defined as per IEC 61280-1-3 2010 clause 3.1.3. Measured at room temperature. All measurements after a minimum of 30 minutes warm-up time.
|
|---|---|
| Spectral Width (FWHM) | < 5 nm |
| Optical Launch Conditions | IEC 62614 Ed 1.0 July 2010 |
| Output Optical Power (850 nm) |
≥ -11dBm
Muxed variant. Combined output power; power measured with any one laser on full power at a time.
|
| Output Optical Power (1310 nm) |
≥ -8 dBm
Muxed variant. Combined output power; power measured with any one laser on full power at a time.
|
| TEC Stabilized | No |
| Wavelength Tolerance | ±20 nm |
| Optical Power Tuning Range | Fixed Output Power |
| Power Control Mode | Constant Current |
| Modulation |
0.15 to 2.0 kHz
Modulation duty cycle is fixed at 50%. Modulation depth is fixed at 100%.
|
| Modulation Setting Resolution | 1 Hz |
| Modulation Accuracy | ±0.5 Hz |
| Fiber Type |
Multimode Fiber
Ordering information: 50 µm MMF EF compliant; IEC 60793-2-10 Type A1a MM / ISO 11801 OM2 compliant multimode fiber per datasheet footnote
|
| Connector Type | FC/PC |
| Operating Temperature | 10 to 40°C (50 to 104°F) |
|---|---|
| Storage Temperature | -30 to 60°C (-22 to 140°F) |
| Operating Humidity | Maximum 85% Relative Humidity, non-condensing from 10 to 40°C/50 to 104°F |
| Dimensions (W x H x D) | 4.06 x 13.26 x 37.03 cm (1.6 x 5.22 x 14.58 in) |
| Weight | 1.3 kg (2.86 lb) |
| MSRC-C21308FPX-M101-MFP |
850/1310 nm Standard FP Laser Single output 50 µm MMF EF compliant FC/PC Connectors
Single Output (Mux'd)
|
|---|
| Safety and regulatory | When installed in a MAP chassis, complies to CE, CSA/UL/IEC61010-1, LXI Class C requirements, meets the requirements of Class 1M in standard IEC 60825-1 (2014), and complies with 21 CFR 1040.1 except deviations per Laser Notice No. 50 |
|---|
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Insertion loss testing
- General power meter or loss calibration
- Multimode loss testing with IEC compliant launch conditions
- Transient loss testing stimulus
- Applications requiring modulation from 150 to 2000 Hz with 1 Hz resolution
Options & Accessories
| Option | Description |
|---|---|
| CleanBlastPRO | CleanBlastPRO fiber end-face cleaning system — Optional inspection and cleaning tool for removing dirt and debris from connectors; available in a benchtop and portable version |
| FiberChek | FiberChek probe microscope — Optional one-button handheld fiber inspection probe |
| P5000i | P5000i fiber microscope — Optional automated fiber inspection and analysis probe with PASS/FAIL capability |
