VIAVI MAP mOSX-C1 MOSX-C1132XCCB0-M100-MLU 32-Port LC/APC Optical Matrix Switch Module
32-port common connection single-mode optical matrix switch for the VIAVI MAP Series with LC/APC bulkhead connectors in a dual-slot module.
- Matrix Size
- 32 ports
- Connector Type
- LC/APC bulkhead
- Slot width
- Dual Slot
- Connection Type
- Any port to any port
Overview
The MOSX-C1132XCCB0-M100-MLU is the 32-port, LC/APC bulkhead version of the VIAVI MAP Series mOSX-C1 Cross Connect Optical Switch. It is a common connection single-mode optical matrix switch that occupies two slots in a MAP-300 or MAP-200 chassis and works as a test path manager, connecting multiple test paths across the switch fabric so that test processes can run in parallel.
The switch is non-blocking and bidirectional. Its any-port to any-port fabric supports both symmetric MxM topologies (for example 8x8) and asymmetric topologies (for example 4x12), so the same hardware can be reconfigured in software. Ports can be assigned as inputs or outputs as needed. Connections can be pre-configured without light present, stay in a blocking state until activated, and can be made or broken without affecting any other connection.
Switching principle
The switching engine uses compact piezoelectric actuators to align the signal path through expanded beam optics. A capacitive sensor matrix measures the position of the collimating lens for long-term stability and repeatability, and connections hold even when no light is present. Reflective optics fold the switch engine so that each fiber can connect to every other fiber.
Control
The module can be controlled through the SCPI remote interface or the MAP Series graphical user interface. Ports can be given logical names, and connections between ports can be disabled or re-enabled. As a software option, the switch can be limited to a set MxN topology so that only connections matching that structure are allowed. Paired with VIAVI mOSW modules, it can be used to build larger switching systems.
Key Features
- Non-blocking, bidirectional matrix switch
- 32 ports with any-port to any-port connection fabric
- LC/APC bulkhead connectors, dual-slot module
- Symmetric (e.g. 8x8) and asymmetric (e.g. 4x12) topologies configurable on demand
- 1.0 dB typical insertion loss
- 25ms switching speed
- Dark fiber switching
- Flexible SCPI remote interface or MAP Series Graphical User Interface (GUI)
- Connections between ports can be disabled or re-enabled
- Logical port naming in the GUI
- Compatible with all current MAP-300 and MAP-200 chassis
Specifications
| Matrix Size | 32 ports |
|---|---|
| Connector Type | LC/APC bulkhead |
| Slot width | Dual Slot |
| Connection Type | Any port to any port |
| Fiber Type |
Single Mode
For IEC 60793-2-50 Type B1.3/ ISO 11801 OS2 compliant fiber, i.e. Corning SMF-28e
|
| Dark Fiber Switching | Yes |
| Bi-Direction Optics | Yes |
| Operating Wavelength Range |
1260 nm to 1675 nm
Web page and datasheet feature list state 1250 to 1675 nm; datasheet specification table value used
|
|---|---|
| Insertion Loss (IL), Active Connection Maximum |
≤ 1.5 dB
Including one pair of connectors; tested at 1550 nm. Value for 16 or 32 ports
|
| Insertion Loss (IL), Open Port | > 55 dB |
| Insertion Loss (IL), Inactive Connection | > 55 dB |
| Return Loss (RL) |
> 50 dB
Tested with APC connectors at 1550 nm
|
| Polarization Dependent Loss (PDL) |
< 0.1 dB
For wavelength range of 1530 nm – 1675 nm. Tested at 1550 nm
|
| Repeatability (maximum) |
± 0.05 dB
Measured between two consecutive readings over 100 cycles. Value for 16 or 32 ports
|
| IL stability |
± 0.05 dB
Any channel drift relative to reference channel at constant temperature over 15 mins period. Value for 16 or 32 ports
|
| Wavelength Dependent Loss (WDL) |
≤ 0.3 dB
Footnote gives wavelength range as 1530 nm – 167 nm (as printed)
|
| Temperature Dependent Loss (TDL) |
≤ 0.2 dB
Over the temperature range 15 to 35°C at 1550 nm after thermal stabilization. Value for 16 or 32 ports
|
| Crosstalk (maximum) |
- 55 dB
Value for 16 or 32 ports
|
| Max input power (optical) | 500 mW (27 dBm) |
| Switching time | ≤ 25 ms |
| Lifetime | > 10^9 Cycles |
| Warming up Time | 60 min |
| Operation temperature | 10°C to 40°C |
|---|---|
| Operation humidity | < 85% RH non-condensing |
| Storage temperature | -40°C to +70°C, <40% RH non-condensing |
| Safety | When installed in a MAP chassis, MAP optical switches comply with CE, CSA/UL/IEC61010-1, and LXI Class C requirements |
| Dimensions (W x H x D) |
Dual slot: 8.1 x 13.26 x 37.03 cm (3.2 x 5.2 x 5.7 in)
Imperial depth printed as 5.7 in in the datasheet
|
|---|---|
| Weight | Dual slot: 3.1 kg (6.8 lb) |
| Chassis compatibility | Compatible with all current MAP-300 and MAP-200 chassis |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- Test system automation for multi-port components, modules and line cards
- Complex manufacturing test sequencing
- Parallel test architectures
- Larger switching systems combined with MAP-Series mOSW modules
Options & Accessories
| Option | Description |
|---|---|
| AC500 | FC/PC-FC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC501 | FC/PC-SC/PC Universal Connector Adapter — Replacement mating sleeve |
| AC502 | FC/APC-FC/APC Universal Connector Adapter — Replacement mating sleeve |
| AC503 | FC/APC-SC/APC Universal Connector Adapter — Replacement mating sleeve |
| CleanBlast | CleanBlast fiber end-face cleaning system — Optional accessory for removing dirt and debris from connectors; available in benchtop and portable versions |
| FiberChek | FiberChek probe microscope — Optional one-button handheld fiber inspection probe |
| P5000i | P5000i fiber microscope — Optional automated fiber inspection and analysis probe with PASS/FAIL capability |
