VIAVI TestCenter Sub-100G Multi-Speed Appliances and Test Modules for L2–3 Ethernet Validation
Family of TestCenter fX, dX, mX and pX test modules and M1/C2 appliances for L2–3 validation of sub-100G Ethernet networks.
- Line rates
- 10/5/2.5/1G and 100M
- Interface cards
- Up to two interface cards (NICs) and up to 8 Ethernet ports
- Media support
- NBASE-T and IEEE 802.3bz compliant; Support up to 8 Ethernet ports
- Inter-system time synchronization
- Timing chain synchronization with ±20 ns; Synchronized via GPS or CDMA network; Using NTP or PTP packet-based approaches
Overview
Sub-100G Ethernet technologies remain foundational across enterprise, service provider, industrial and data center networks for access, aggregation, control-plane and specialized connectivity applications. Validating these networks requires checking performance, interoperability, resiliency and long-term operational stability.
VIAVI TestCenter Sub-100G Solutions are available both as modular chassis-based architectures using fX, dX, mX and pX sub-100G test modules and as compact appliance platforms such as M1 and C2. This allows test configurations to scale across enterprise, service provider and data center infrastructures.
The solutions support functional, performance and interoperability validation, including traffic generation and analysis, measurement of latency, jitter, throughput and packet loss, and regression testing for hardware, software and topology changes. They integrate with VIAVI TestCenter hardware from 10MB to 1.6T and with TestCenter Virtual environments.
Appliances
The C2 is a 2U appliance that accepts up to two interface cards (NICs) and up to 8 Ethernet ports, with synchronized hardware timing across NICs and ports, supporting 10G, 5G, 2.5G, 1G and 100M line rates as well as Automotive Ethernet. The M1 is a compact 2U appliance offered in several kit configurations from 1G SFP to 100G QSFP28, designed for low-noise benchtop operation, with traffic and protocol performance identical to fX2 mainframe test modules.
Test modules
The fX2 module provides 16 SFP ports at 10/100/1000 Mb/s. The fX3 modules provide four or six QSFP28 ports with FPGA-based mode switching between 100, 50, 40, 25 and 10G speeds, offered in several speed combinations with hardware speed upgrade options. The mX3 modules provide eight SFP28 ports at 25/10G or 25G only, with two multi-core Intel Xeon class CPUs per module for stateful router and host traffic emulation. Modules receive transmit line clocking and time-stamping from the control modules of the SPT-N12U and SPT-N4U chassis.
Models in this series
| Model | Description | |
|---|---|---|
| FX3-QSFP28-4-100A |
fX3 Quint-Speed 4-Port Module FX3-QSFP28-4-100A 100G Only QSFP28 Test Module
fX3 4-port QSFP28 Layer 2-3 test module base package configured for 100G Ethernet only, with Autonomous Flow Tracking support. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-125A |
fX3 Quint-speed 4-port Module FX3-QSFP28-4-125A 100/25G QSFP28 Test Module
Four-port QSFP28 TestCenter Layer 2-3 test module with 100G and 25G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-150A |
fX3 Quint-speed 4-port Module FX3-QSFP28-4-150A 100/40/10G QSFP28 Test Module
Four-port QSFP28 TestCenter Layer 2-3 test module with 100G, 40G and 10G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-175A |
fX3 Quint-speed 4-port Module FX3-QSFP28-4-175A 100/50/25G QSFP28 Test Module
Four-port QSFP28 TestCenter Layer 2-3 test module with 100G, 50G and 25G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-225A |
fX3 Quint-speed 4-port Module FX3-QSFP28-4-225A 100/50/40/25/10G QSFP28 Test Module
Four-port QSFP28 TestCenter Layer 2-3 test module with quint-speed 100G, 50G, 40G, 25G and 10G Ethernet modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-40A |
fX3 Quint-Speed 4-Port Module FX3-QSFP28-4-40A 40G Only QSFP28 Test Module
fX3 4-port QSFP28 Layer 2-3 test module base package configured for 40G Ethernet only, for N12U and N4U chassis. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-4-50A |
fX3 Quint-Speed 4-Port Module FX3-QSFP28-4-50A 50G Only QSFP28 Test Module
fX3 4-port QSFP28 Layer 2-3 test module base package configured for 50G Ethernet only, up to 8 ports per slot. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-100A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-100A 100G Only QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module configured for 100G Ethernet only, with AFT support. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-125A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-125A 100/25G QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module with 100G and 25G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-150A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-150A 100/40/10G QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module with 100G, 40G and 10G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-175A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-175A 100/50/25G QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module with 100G, 50G and 25G Ethernet speed modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-225A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-225A 100/50/40/25/10G QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module with quint-speed 100G, 50G, 40G, 25G and 10G Ethernet modes. Listed under TestCenter 100G
|
Details → |
| FX3-QSFP28-6-50A |
fX3 Quint-speed 6-port Module FX3-QSFP28-6-50A 50G Only QSFP28 Test Module
Six-port QSFP28 TestCenter Layer 2-3 test module configured for 50G Ethernet only. Listed under TestCenter 100G
|
Details → |
| M1-KIT-04-START |
M1 Multi-Speed Appliance M1-KIT-04-START 4-Port 10G/1G SFP+ Layer 2-3 Starter Kit
Compact 2U TestCenter Layer 2-3 test appliance kit with four 10G/1G SFP+ ports and Layer 2-3 software. Listed under TestCenter 100G
|
Details → |
| M1-KIT-06-START |
M1 Multi-Speed Appliance M1-KIT-06-START 8-Port 10G/1G SFP+ Layer 2-3 Starter Kit
Compact 2U TestCenter Layer 2-3 test appliance kit with eight 10G/1G SFP+ ports and Layer 2-3 software. Listed under TestCenter 100G
|
Details → |
| M1-KIT-15-START |
M1 Multi-Speed Appliance M1-KIT-15-START 16-Port FX2 10/100/1000 SFP NIC and HW Timing Kit
Compact 2U TestCenter appliance kit with sixteen 10/100/1000M SFP ports on an FX2 NIC and hardware timing. Listed under TestCenter 100G
|
Details → |
| M1-KIT-18-START |
M1 Multi-Speed Appliance M1-KIT-18-START 8-Port FX2 10/100/1000 SFP and 4-Port 10/1G SFP+ Timing Kit
Compact 2U TestCenter appliance kit combining eight 10/100/1000M SFP ports and four 10G/1G SFP+ ports with timing. Listed under TestCenter 100G
|
Details → |
| M1-KIT-21-START |
M1 Multi-Speed Appliance M1-KIT-21-START 4-Port DX3 100/50/40/25/10G QSFP28 L2-3 and RFC 2544 Starter Kit
Compact 2U TestCenter appliance kit with four DX3 QSFP28 ports at 100/50/40/25/10G, Layer 2-3 and RFC 2544 software. Listed under TestCenter 100G
|
Details → |
| M1-KIT-23-START |
M1 Multi-Speed Appliance M1-KIT-23-START 2-Port DX3 100/50/40/25/10G QSFP28 and 4-Port FX2 10/1G SFP+ Kit
Compact 2U TestCenter appliance kit combining two DX3 QSFP28 ports at 100/50/40/25/10G with four FX2 10/1G SFP+ ports. Listed under TestCenter 100G
|
Details → |
| M1-KIT-25-START |
M1 Multi-Speed Appliance M1-KIT-25-START 4-Port 1G SFP NIC and 8-Port 10G/5G/2.5G/1G/100M Copper Kit
Compact 2U TestCenter appliance kit with four 1G SFP ports and eight 10G/5G/2.5G/1G/100M copper 10GBASE-T ports. Listed under TestCenter 100G
|
Details → |
| AP-C2-EP-KIT-BM-1 |
VIAVI TestCenter C2 AP-C2-EP-KIT-BM-1 Enterprise Benchmarking Kit with 1-Year Support
C2 multi-speed appliance enterprise benchmarking kit with 1-year support, offering up to 8 Ethernet ports at 10G to 100M. |
Details → |
| AP-C2-EP-KIT-BM-3 |
VIAVI TestCenter C2 AP-C2-EP-KIT-BM-3 Enterprise Benchmarking Kit with 3-Year Support
C2 multi-speed appliance enterprise benchmarking kit with 3-year support, offering up to 8 Ethernet ports at 10G to 100M. |
Details → |
| AP-C2-EP-KIT-BM-ROUTING-1 |
VIAVI TestCenter C2 AP-C2-EP-KIT-BM-ROUTING-1 Enterprise Benchmarking and Routing Kit with 1-Year Support
C2 multi-speed appliance kit for enterprise benchmarking and routing tests, with 1-year support and up to 8 Ethernet ports. |
Details → |
| AP-C2-EP-KIT-BM-ROUTING-3 |
VIAVI TestCenter C2 AP-C2-EP-KIT-BM-ROUTING-3 Enterprise Benchmarking and Routing Kit with 3-Year Support
C2 multi-speed appliance kit for enterprise benchmarking and routing tests, with 3-year support and up to 8 Ethernet ports. |
Details → |
Key Features
- High-density Ethernet testing with dX, fX, mX and pX test modules or M1/C2 appliances with a variety of NIC configurations
- Support for regression testing and long-term network lifecycle assurance
- Line-rate traffic generation and analysis across large port counts
- Repeatable measurement of latency, jitter, throughput and packet loss
- Standards-aligned multi-vendor interoperability validation
- Integration with 10MB to 1.6T TestCenter hardware and TestCenter Virtual environments
- 19 scheduling algorithms for traffic emulation from micro-bursts to timed frame sequences
- Emulated device count, traffic and rate can be changed on the fly
- Full packet capture with trigger and filtering controls
- Intelligent power control to shut down unused test modules
- Enable and disable Clause 74 BASE-R FEC, Clause 91 RS-FEC and Clause 108 RS-FEC on fX3 and mX3 modules
- Autonomous Flow Tracking (AFT) on fX3 4-port and 6-port modules in 100G speed mode
- M1 low-noise design for benchtop operation
- TestCenter MCP Server support on M1 for conversational test configuration, execution and analysis
- Chassis chaining and external timing sync via direct connect, NTP, PTP, GPS and CDMA
Specifications
C2 Multi-speed Appliance
|
Line rates
C2 |
10/5/2.5/1G and 100M |
|---|---|
|
Interface cards
C2 |
Up to two interface cards (NICs) and up to 8 Ethernet ports |
|
Media support
C2 |
NBASE-T and IEEE 802.3bz compliant; Support up to 8 Ethernet ports |
|
Inter-system time synchronization
C2 |
Timing chain synchronization with ±20 ns; Synchronized via GPS or CDMA network; Using NTP or PTP packet-based approaches
Ports in the same chassis are phase-locked to the internal timing source |
|
VFDs
C2 |
6 VFDs available for each of 256 stream templates |
|
Frame length range and controls
C2 |
100% line rate for frames of 60-16004 bytes controlled by fixed, increment, decrement, random, and IMIX modes |
|
Statistics
C2 |
Nearly 50 transmit stats per port reported in real time; Over 40 real-time measurements per stream including latency, jitter, and data integrity |
|
Time source
C2 |
Stratum-3 oscillator default time source; adjustable ±102 PPM |
|
Frame timestamp resolution
C2 |
2.5 ns |
|
Capture
C2 |
256 MB per port
With trigger and filtering controls |
|
Interfaces
C2 |
Power switch, Admin port, VGA, HDMI, USB 2.0, USB 3.0, test ports
Number of test ports depends on appliance configuration |
|
External Time Reference connectors
C2 |
10 MHz with 50 Ohm cable (SMA); 1 PPS with 50 Ohm cable (SMA); SERIAL DCE (RJ45); IEEE 1588 (RJ45) |
|
Multiple chassis connections
C2 |
SYNC OUT (RJ45), SYNC IN (RJ45) |
|
Dimensions
C2 |
3.5” (H) x 13.9” (W) x 11.2” (D) |
|
Weight
C2 |
13 pounds
Without external power adapter |
|
Operating environment
C2 |
0°C to 35°C, 10% to 70%
Non-condensing |
|
Storage environment
C2 |
-20°C to 70°C, 0% to 100%
Non-condensing |
|
AC power adapter
C2 |
Input voltage range: 100 V-240 V 50-60 Hz; Output voltage range: 19.5 V, 16.9 A, 330 W |
|
Total DC power
C2 |
330 W |
|
Safety compliance
C2 |
FCC Part 15 Class A; CE Mark Class A EN 55032:2012; EN 55024:2010; EN 61000-3-3:2013; EN 61000-3-2:2014; UL 60950-1:2007 R10.14; CAN/CSA-C22.2 NO.60950-1-07+A1:2011+A2:2014 |
fX2 10/100/1000Mbs Ethernet Test Module
|
Port density
fX2-1G-S16 |
16 ports |
|---|---|
|
Media support
fX2-1G-S16 |
1000MBASE-SX, 1000MBASE-LX, 10/100/1000MBASE-T (full-duplex only) |
|
Transmit line clock
fX2-1G-S16 |
+/- < 1 PPM on initial shipment. Accurate to +/- 4.6 PPM over 15 years of operation
Stratum-3 rated oscillator is the default time source |
|
Frame time stamp resolution
fX2-1G-S16 |
10ns |
|
Inter-chassis time synchronization
fX2-1G-S16 |
Timing chain synchronization with +/- 20ns
Also via GPS or CDMA network, or NTP/PTP (requires supporting controller version) |
|
Transmit / receive streams per port
fX2-1G-S16 |
32k/64k |
|
VFDs
fX2-1G-S16 |
6 VFDs available for each of 1024 stream templates |
|
Frame length range and controls
fX2-1G-S16 |
100% line rate for 1GE frames of 58-16383 bytes controlled by fixed, increment, decrement, random and IMIX modes
10/100 max frame length of 16350 when not using PPM adjust; 10BASE-T max frame length of 13000 when using PPM adjust |
|
Capture
fX2-1G-S16 |
16 MB per port
With trigger and filtering controls |
|
Operating temperature
fX2-1G-S16 |
15°C - 35°C, 20% - 80% RH (non-condensing) |
fX3 Quint-speed 4-port QSFP28 Modules
|
FX3-QSFP28-4-50A ports (slot / N12U / N4U)
FX3-QSFP28-4-50A |
50G Only: 8 / 96 / 16 |
|---|---|
|
FX3-QSFP28-4-100A ports (slot / N12U / N4U)
FX3-QSFP28-4-100A |
100G Only: 4 / 48 / 8 |
|
FX3-QSFP28-4-125A ports (slot / N12U / N4U)
FX3-QSFP28-4-125A |
100/25G: 4/16 / 48/192 / 8/32 |
|
FX3-QSFP28-4-175A ports (slot / N12U / N4U)
FX3-QSFP28-4-175A |
100/50/25G: 4/8/16 / 48/96/192 / 8/16/32 |
|
FX3-QSFP28-4-150A ports (slot / N12U / N4U)
FX3-QSFP28-4-150A |
100/40/10G: 4/4/16 / 48/48/192 / 8/8/32 |
|
FX3-QSFP28-4-225A ports (slot / N12U / N4U)
FX3-QSFP28-4-225A |
100/50/40/25/10G: 4/8/4/16/16 / 48/96/48/192/192 / 8/16/8/32/32 |
|
Media support
FX3-QSFP28-4 |
100G: 100GBASE-SR4, 100GBASE-CR4, 100GBASE-LR4, plus additional MSA PMDs; 50G: 25/50G Consortium 50GBASE-CR2; 40G: 40GBASE-SR4, 40GBASE-CR4, 40GBASE-LR4; 25G: 802.3by 25GBASE-CR, 25GBASE-CRS, 25GBASE-SR; 10G: 10GBASE-SR, 10G Copper DAC
Support varies by module speed mode; QSFP28 to SFP28 breakout cable options |
|
FEC
FX3-QSFP28-4 |
Clause 74 BASE-R FEC, Clause 91 RS-FEC, and Clause 108 RS-FEC
Auto-Negotiation and Link Training for 100G, 50G, 40G and 25G |
|
Frame time stamp resolution
FX3-QSFP28-4 |
2.5ns |
|
Transmit / receive streams per port
FX3-QSFP28-4 |
64k TX and 128k RX for all speeds |
|
VFDs and variable fields
FX3-QSFP28-4 |
6 VFDs available for each 1k (100G) and 512 (50/40/25/10G) stream templates; 4 m route insertion table entries for all speeds |
|
Frame length range and controls
FX3-QSFP28-4 |
100% line rate for frames of 64-16383 bytes controlled by fixed, increment, decrement, random and IMIX modes |
|
Transmit clock adjustment
FX3-QSFP28-4 |
±100 PPM in 1 PPM increments per 2 100G ports |
|
Capture
FX3-QSFP28-4 |
1 MB per 100G or 40G port; 512 kB per 50G port; 256 kB per 25G port |
|
Operating temperature
FX3-QSFP28-4 |
15°C - 35°C, 20% - 80% RH (non-condensing) |
fX3 Quint-speed 6-port QSFP28 Modules
|
FX3-QSFP28-6-50A ports (slot / SPT-N12U)
FX3-QSFP28-6-50A |
50G Only: 12 / 144 |
|---|---|
|
FX3-QSFP28-6-100A ports (slot / SPT-N12U)
FX3-QSFP28-6-100A |
100G Only: 6 / 72 |
|
FX3-QSFP28-6-125A ports (slot / SPT-N12U)
FX3-QSFP28-6-125A |
100/25G: 6/24 / 72/288 |
|
FX3-QSFP28-6-175A ports (slot / SPT-N12U)
FX3-QSFP28-6-175A |
100/50/25G: 6/12/24 / 72/144/288 |
|
FX3-QSFP28-6-150A ports (slot / SPT-N12U)
FX3-QSFP28-6-150A |
100/40/10G: 6/6/24 / 72/72/288 |
|
FX3-QSFP28-6-225A ports (slot / SPT-N12U)
FX3-QSFP28-6-225A |
100/50/40/25/10G: 6/12/6/24/24 / 72/144/72/288/288 |
|
Media support
FX3-QSFP28-6 |
100G: 100GBASE-SR4, 100GBASE-CR4, 100GBASE-LR4, plus additional MSA PMDs; 50G: 25/50G Consortium 50GBASE-CR2; 40G: 40GBASE-SR4, 40GBASE-CR4, 40GBASE-LR4; 25G: 802.3by 25GBASE-CR, 25GBASE-CRS, 25GBASE-SR; 10G: 10GBASE-SR, 10G Copper DAC
Support varies by module speed mode; QSFP28 to SFP28 breakout cable options |
|
Frame time stamp resolution
FX3-QSFP28-6 |
2.5ns |
|
Transmit / receive streams per port
FX3-QSFP28-6 |
64k TX and 128k RX for all speeds |
|
Frame length range and controls
FX3-QSFP28-6 |
100% line rate for frames of 64-16383 bytes controlled by fixed, increment, decrement, random and IMIX modes |
|
Transmit clock adjustment
FX3-QSFP28-6 |
+/- 100 PPM in 1 PPM increments per 2 100G ports |
|
Capture
FX3-QSFP28-6 |
1MB per 100G or 40G port; 512kB per 50G port; 256kB per 25G port |
|
Operating temperature
FX3-QSFP28-6 |
15 C - 35 C, 20% - 80% RH (non-condensing) |
M1 Multi-speed Appliance
|
Speeds
M1 |
100/50/40/25/10/5/2.5/1G and 10/100/1000M |
|---|---|
|
Transmit line clock
M1 |
± < 1 PPM on initial shipment. Accurate to ± 4.6 PPM 15 years of operation
Stratum-3 rated oscillator is the default time source |
|
Frame time-stamp resolution
M1 |
2.5 ns |
|
Operating condition
M1 |
41° to 86°F (5° to 30°C) ambient temperature. 20% to 80% relative humidity |
|
AC input range
M1 |
100-240VAC (Autosensing) |
|
Max power draw
M1 |
Maximum of 2000W |
|
Weight
M1 |
Unit installed weight: 32 lb. (14.5 kg); Shipping weight: 42 lb. (19 kg) |
|
Dimensions
M1 |
2U rack mount height; 20” (D) x 17.5” (W) x 3.5” (H) or 50.80cm x 44.45 cm x 8.89 cm |
|
Ports
M1-KIT-04-START |
4 SFP+ ports, 10/1G
Streams 64k/128k; capture buffer 256 MB |
|
Ports
M1-KIT-06-START |
8 SFP+ ports, 10/1G
Streams 64k/128k; capture buffer 256 MB |
|
Ports
M1-KIT-15-START |
16 SFP ports, 1000M/100M/10M
Streams 32k/64k; capture buffer 8 MB; ACC-6092A needed to support BASE-T (RJ-45) |
|
Ports
M1-KIT-18-START |
8 SFP ports, 4 SFP+ ports; 1000M/100M/10M ; 10G/1G |
|
Ports
M1-KIT-21-START |
4 QSFP28 ports, 100G/50G/40G/25G/10G Ethernet
Capture buffer 8 MB per port; frame size 60 to 16,004 |
|
Ports
M1-KIT-23-START |
2 QSFP28 ports and 4 SFP+ ports
Capture buffer 8 MB per port; frame size 60 to 16,004 |
|
Ports
M1-KIT-25-START |
8 10G BASE-T ports, 4 SFP ports
Copper card 10G/5G/2.5G/1G/100M Ethernet; capture buffer 8 MB per port |
|
Workstation requirements
M1 |
Windows-based workstation with 10/100/1000 Mbps Ethernet NIC; mouse and color monitor required for GUI operation; Linux- or Windows-based workstation for scripting; Mac-, Linux-, or Windows-based workstation for Rest API support |
mX3 Dual-speed 8-port SFP28 Modules
|
MX3-25GD-S8 ports (slot / SPT-N12U / SPT-N4U)
MX3-25GD-S8 |
25G/10G: 8/8 / 96/96 / 16/16 |
|---|---|
|
MX3-25GO-S8 ports (slot / SPT-N12U / SPT-N4U)
MX3-25GO-S8 |
25G Only: 8 / 96 / 16 |
|
Media support
MX3-25GD-S8, MX3-25GO-S8 |
25G: 802.3 by 25GBASE-CR, 25GBASE-CRS, 25GBASE-SR; 10G: 10GBASE-SR, 10G Copper DAC
Support varies by module speed mode; Auto-Negotiation and Link Training for 25G |
|
Frame time stamp resolution
MX3-25GD-S8, MX3-25GO-S8 |
2.5 ns |
|
Transmit/receive streams per port
MX3-25GD-S8, MX3-25GO-S8 |
TX/ 64K TX and RX/128K for all speeds |
|
Frame length range and controls
MX3-25GD-S8, MX3-25GO-S8 |
100% line rate for frames of 58-16383 bytes controlled by fixed, increment, decrement, random and IMIX modes |
|
Capture
MX3-25GD-S8, MX3-25GO-S8 |
512 MB per 25G/10G port |
|
Operating temperature
MX3-25GD-S8, MX3-25GO-S8 |
15°C - 35°C, 20% - 80% RH (non-condensing) |
Applications
- SDN and data center forwarding validation
- Device benchmarking per IETF RFC 2544, RFC 2889 and RFC 3918
- Service provider core and edge router testing
- Data center top-of-rack, spine and core switch benchmarking
- Carrier Ethernet service validation
- Subscriber emulation
- High-scale terabit router testing
- Functional, conformance and performance testing
- Network equipment burn-in and production line test
- Pre-deployment testing and troubleshooting
- Enterprise IT device and network testing
- University and technical training labs
Options & Accessories
| Option | Description |
|---|---|
| ACC-6025A | 1000Base-SX GigE SFP Transceiver, MM 850nm, LC Connector |
| ACC-6026A | 1000Base-LX GigE SFP Transceiver, SM 1310nm, LC Connector |
| ACC-6092A | Copper transceiver, SFP, 1000BASE-T RJ-45 — Full-duplex operation only |
| ACC-6099A | Optical transceiver, SFP, 1300NM, 100BASE-FX MMF |
| ACC-6095A | Optical Transceiver QSFP28 100GBASE-SR4 MMF 850NM |
| ACC-6096A | Optical Transceiver QSFP28 100GBASE-LR4 SMF 1310NM |
| ACC-1034A | Copper DAC QSFP28 100GBASE-CR4 1M |
| ACC-1035A | Copper DAC QSFP28 100GBASE-CR4 3M |
| ACC-1038A | Copper DAC QSFP28 100GBASE-CR4 5M |
| HWO-FX3-QSFP28-4-100G | 100G Hardware Speed Option for FX3-QSFP28-4 |
| HWO-FX3-QSFP28-4-50G | 50G Hardware Speed Option for FX3-QSFP28-4 |
| HWO-FX3-QSFP28-4-40G | 40G Hardware Speed Option for FX3-QSFP28-4 |
| HWO-FX3-QSFP28-4-25G | 25G Hardware Speed Option for FX3-QSFP28-4 |
| HWO-FX3-QSFP28-4-10G | 10G Hardware Speed Option for FX3-QSFP28-4 |
| HWO-FX3-QSFP28-6-100G | 100G Hardware Speed Option for FX3-QSFP28-6 |
| HWO-FX3-QSFP28-6-50G | 50G Hardware Speed Option for FX3-QSFP28-6 |
| HWO-FX3-QSFP28-6-40G | 40G Hardware Speed Option for FX3-QSFP28-6 |
| HWO-FX3-QSFP28-6-25G | 25G Hardware Speed Option for FX3-QSFP28-6 |
| HWO-FX3-QSFP28-6-10G | 10G Hardware Speed Option for FX3-QSFP28-6 |
| BPK-1407 | Autonomous Flow Tracking (AFT) Package — Only supported on fX3 4-port and 6-port modules in 100G speed mode |
Documents & Resources
C2 Multi-Speed Appliances
datasheet · PDF
FX2 Multi-Speed 16-port 10/100/1000Mbs Module
datasheet · PDF
FX3 4-Port Quint-Speed QSFP28 Modules
datasheet · PDF
FX3 6-Port Quint-Speed QSFP28 Modules
datasheet · PDF
M1 Multi-Speed Appliance
datasheet · PDF
MX3 Dual-Speed 8-port 25/10G SFP28 Modules
datasheet · PDF
MX3 Quint-Speed 4-Port QSFP28 Modules
datasheet · PDF
PX3 12-Port Quint-Speed QSFP28 Modules
datasheet · PDF
DX2 Quint-Speed 16-port Module
datasheet · PDF
DX3 12-Port Quint-Speed QSFP28 Module
datasheet · PDF
FX3 Dual-Speed 25/10G SFP28 Module
datasheet · PDF
MX2 Dual-speed 12-port Module
datasheet · PDF
TSN & Automotive C2 Appliance
datasheet · PDF
TSN and Automotive M1 Appliance
datasheet · PDF
High-Speed Ethernet Product Portfolio
brochure · PDF
TestCenter Platforms
brochure · PDF
TestCenter L2-3 Testing Solution
other