SPA06MA-O
Radio Analysis Module SPA06MA-O for OneAdvisor 800
6 GHz radio analysis module for the VIAVI OneAdvisor 800 covering spectrum, interference, 4G/5G, RFoCPRI, Ethernet and Open RAN testing.
- Frequency Range
- 9 kHz to 6 GHz
- Frequency Reference Stability
- ±0.5 ppm (-30 to 85°C) + aging
- Frequency Reference Accuracy with GPS
- ±25 ppb
- GPS Holdover
- ±50 ppb
Overview
The SPA06MA-O is a member of the VIAVI Radio Analysis Module (SPAxxMA) family, a set of modules that pair with the OneAdvisor 800 wireless field test platform. It covers 9 kHz to 6 GHz and combines spectrum analysis, signal analysis, RFoCPRI interference analysis, Ethernet testing and O-DU emulation in one portable module.
The spectrum analyzer provides swept and FFT modes, gated sweep, and optional real-time persistent spectrum analysis with 50 MHz or 100 MHz of instantaneous bandwidth. Optional interference analysis adds spectrogram and RSSI logging, interference finder triangulation, radar chart localization and TDD Auto Gated Spectrum (TAGS) for 5G NR. Cellular signal analyzers are available for LTE/LTE-A FDD and TDD, 5G NR, DSS, NSA, GSM/GPRS/EDGE, with blind scanner, route map, channel scanner and EMF measurement options.
Ethernet, fronthaul and timing
The SPA06MA-O variant adds SFP+ and QSFP cages for Ethernet verification from 10M/100M/1GE up to 10GE, 25GE and 100GE, with RFC 2544, Y.1564 and QuickCheck workflows, IEEE 1588v2 PTP master and slave emulation, IPv6 testing, wire-speed capture with integrated Wireshark, and CPRI BERT. RFoCPRI interference analysis works on CPRI rates 1 to 8 through dual SFP/SFP+ ports.
The module supports test process automation through automated testing, remote control and cloud services for asset and data management when used with the OneAdvisor 800.
Key Features
- Frequency coverage from 9 kHz to 6 GHz
- Real-time persistent spectrum analysis with up to 100 MHz of instantaneous bandwidth
- 4G-LTE and 5G-NR compliance, including blind-scanner, signal coverage, and synchronization assessment
- Ethernet verification for 1G, 10G, 25G, and 100G
- Open RAN capable, validating Open Radio Units (O-RU) with O-DU emulation
- Fiber characterization supporting OTDR (CWDM, DWDM) and multi-channel verification
- Versatile all-in-one portable field test solution for the OneAdvisor 800
- Multi-functional test solution for RF characterization, cellular technologies (4G and 5G), fiber links, and Ethernet networks
- Supports test process automation with automated testing, remote control, and cloud services, including asset and data management
- Gated sweep, TDD Auto Gated Spectrum (TAGS) and interference finder options
- RFoCPRI interference analysis on CPRI rates 1 to 8
- IEEE 1588v2 PTP master and slave emulation with time error measurements
- Wire-speed capture with integrated Wireshark on the test set
- Three SFP+ and two QSFP ports on the SPA06MA-O
Specifications
Frequency
| Frequency Range | 9 kHz to 6 GHz |
|---|---|
| Frequency Reference Stability | ±0.5 ppm (-30 to 85°C) + aging |
| Frequency Reference Accuracy with GPS |
±25 ppb
GPS lock
|
| GPS Holdover |
±50 ppb
Over 30 min after losing GPS lock, temperature variation < 8°C
|
| Aging | ±1 ppm/year |
| Frequency Readout Accuracy (Start, Stop, Center, Marker) |
± (readout frequency x frequency reference accuracy + RBW centering + 0.5 x horizontal resolution + 2 Hz)
horizontal resolution = frequency span/trace #; RBW center = 15% x RBW
|
| Frequency Span Range | 0 Hz (zero span), 9 kHz to 6 GHz |
| Frequency Span Resolution | 1 Hz |
| Frequency Span Accuracy | ± (2 x RBW centering + horizontal resolution) |
Sweep and Trigger
| Trace Update |
15 trace/sec
Nominal; Span = 10 MHz, RBW 3 kHz, Fast
|
|---|---|
| Sweep Time Range (manual sweep) |
0.4 ms to 600 s
Nominal
|
| Sweep Time Range (zero span) |
1 μs to 600 s
Nominal
|
| Sweep Time Accuracy |
±2 %
Zero span
|
| Sweep Type | Continuous, Single |
| Sweep Mode | Gated sweep (requires option ONA-SP-GSS), Normal and FFT modes, Fast |
| Trigger Source | Free video, external, GPS, Internal |
| Trigger Delay | Range: 0 to 10 s; Resolution: 6 μs |
Bandwidth
| Resolution Bandwidth (RBW) Range |
1 Hz to 3 MHz
Nominal; ~3 dB bandwidth, 1-3-10 sequence
|
|---|---|
| Resolution Bandwidth (RBW) Accuracy |
±10%
Nominal
|
| Video Bandwidth (VBW) Range |
1 Hz to 3 MHz
Nominal; ~3 dB bandwidth, 1-3-10 sequence
|
| Video Bandwidth (VBW) Accuracy |
±10%
Nominal
|
Amplitude
| Measurement range |
DANL to +25 dBm
9 kHz to 6 GHz
|
|---|---|
| Input attenuator range |
0 to 55 dB in 5 dB steps
9 kHz to 6 GHz
|
| Preamplifier Frequency range | 10 MHz to 6 GHz |
| Preamplifier Gain | 20 dB |
| Max RF Input Operating Level |
+25 dBm, ±50 VDC
Average CW power; 9 kHz to 6 GHz
|
| Display Range (Log/Linear Scale) | 10 divisions; 1 to 20 dB/Division in 1 dB |
| Scale Units | dBm, dBV, dBmV, dBμV, V, mV, W, mW |
| Reference Level Range | -120 to +100 dBm |
| Reference Level Resolution | Log scale: 0.1 dB; Linear scale: 1 % of reference level |
| Input VSWR |
1.9:1 (Nominal)
9 kHz to 6 GHz, @ 10 dB Attenuation
|
Absolute Amplitude Accuracy
| 9 kHz to 5 MHz |
± 2.0 dB, ± 1.0 dB (T)
20 to 30°C (68 to 86°F); Preamplifier Off: input signal ≥ -50 dBm; Preamplifier On: -90 dBm < input signal < -50 dBm; auto-coupled, 15-minute warm-up
|
|---|---|
| 5 MHz to 3.2 GHz |
± 1.3 dB, ± 1.0 dB (T)
20 to 30°C (68 to 86°F)
|
| 3.2 GHz to 6 GHz |
± 1.5 dB, ± 1.0 dB (T)
20 to 30°C (68 to 86°F)
|
| 9 kHz to 6 GHz |
± 2.5 dB, ± 2 dB (T)
0 to 50°C (32 to 131°F)
|
Displayed Average Noise Level (DANL)
| Preamplifier Off, 9 kHz to 10 MHz |
-140 dBm, -142 dBm (T)
1 Hz RBW, 1 Hz VBW, 50 Ω termination, 0 dB attenuation, RMS detector
|
|---|---|
| Preamplifier Off, 10 MHz to 1.87 GHz | -141 dBm, -143 dBm (T) |
| Preamplifier Off, 1.87 GHz to 4.0 GHz | -140 dBm, -142 dBm (T) |
| Preamplifier Off, 4.0 GHz to 6.0 GHz | -138 dBm, -140 dBm (T) |
| Preamplifier On, 9 kHz to 10 MHz | -140 dBm, -142 dBm (T) |
| Preamplifier On, 10 MHz to 4.0 GHz | -158 dBm, -161 dBm (T) |
| Preamplifier On, 4.0 GHz to 6.0 GHz | -157 dBm, -160 dBm (T) |
Distortion and Spurious
| Second Harmonic Distortion |
< -60 dBc, typical
500 MHz to 3.0 GHz; input -40 dBm
|
|---|---|
| Third-Order Intercept (TOI), Preamp Off |
+9 dBm, typical
10 MHz to 6.0 GHz
|
| Third-Order Intercept (TOI), Preamp On |
-11 dBm, typical
10 MHz to 6.0 GHz
|
| Spur Free Dynamic Range |
> 101 dB, typical
2/3 (TOI-DANL) in 1 Hz RBW, @ 1 GHz
|
| Inherent Residual Response, Sweep tuned |
-95 dBm
Typical; input terminated, 0 dB attenuation, Preamp off; 10 kHz RBW, 1 kHz VBW, Peak detector; 9 kHz to 6 GHz
|
| Inherent Residual Response, Real time |
-90 dBm
Typical; RBW 30 kHz, VBW 30 kHz, Peak Mode, Span = 100 MHz; 9 kHz to 6 GHz
|
| Input-related Spurious, Images and blockers |
< -75 dBc
0 dB attenuation, input signal = -25 dBm, Preamp off; sweep tuned, peak detector, span < 1 GHz; 9 kHz to 6 GHz (10 kHz RBW, 1 kHz VBW)
|
| Input-related Spurious, Sidebands | < -60 dBc |
| LO Feedthrough to Input |
< -85 dBm
9 kHz to 6 GHz
|
Single Sideband (SSB) Phase Noise
| 10 kHz offset |
-94 dBc/Hz, -96 dBc/Hz (T)
@ 1 GHz
|
|---|---|
| 100 kHz offset |
-97 dBc/Hz, -99 dBc/Hz (T)
@ 1 GHz
|
| 1 MHz offset |
-107 dBc/Hz, -110 dBc/Hz (T)
@ 1 GHz
|
Trace and Marker
| Trace Detectors | Normal, positive peak, negative peak, sample, Average (RMS) |
|---|---|
| Number of Traces | 6 |
| Trace States | Clear/write, maximum hold, minimum hold, capture, load, blank, trace math, trace info |
| Trace Functions | Time expired maximum hold and minimum hold, trace math, trace info |
| Marker Type | Normal, delta, delta pair, marker table |
| Number of Markers | 6 |
| Marker Functions | Noise marker |
| Marker To | Peak, next peak, next peak right, next peak left, min search, always peak; Center, start, stop |
| Audio Beep | Tone change with signal strength |
| Marker Table | Display 6 markers |
Spectrum Analyzer Measurements
| Channel Power | Channel power, Spectral Density, PAR (Peak to Average Ratio) |
|---|---|
| Occupied Bandwidth | Occupied bandwidth, Integrated power, Occupied power, x dB bandwidth |
| Spectrum Emission Mask | Reference power, Peak level at defined range |
| Adjacent Channel Power (ACP) | Reference power, Absolute power at defined frequency offset, Relative power at defined frequency offset |
| Multi-ACP | Reference power at lowest defined frequency, Reference power at highest defined frequency, Absolute power at defined frequency offset, Relative power at defined frequency offset |
| Spurious Emissions | Peak power at defined range, Frequency of peak power at defined range |
| Total Harmonic Distortion | Power level at each harmonic, % of THD |
| Field Strength | Field strength power at markers |
GPS Connectivity (Option ONA-SP-GNSS)
|
GPS Receiver Type
ONA-SP-GNSS
|
Built-in type |
|---|---|
|
GPS Information
ONA-SP-GNSS
|
Latitude, longitude, Satellite, Status |
|
GPS Time and Location
ONA-SP-GNSS
|
Time, Latitude, and longitude on display; Time, Latitude, and longitude on trace |
|
High-Frequency Accuracy, GPS Lock
ONA-SP-GNSS
|
±25 ppb |
|
Connector
ONA-SP-GNSS
|
SMA, female |
|
Supplied antenna
ONA-SP-GNSS
|
SMA (m), 3.3 VDC or 5 VDC |
Wireless Connectivity
|
Bluetooth Interface Type
ONA-MF-BT
|
Built-in type
Option ONA-MF-BT
|
|---|---|
|
Bluetooth Mode
ONA-MF-BT
|
Personal area network (PAN), File transfer profile (FTP) |
|
Wi-Fi Interface Type
ONA-MF-WIFI
|
Built-in type
Option ONA-MF-WIFI
|
|
Wi-Fi Interface Standard
ONA-MF-WIFI
|
IEEE 802.11 a/b/g/n/ac |
|
Wi-Fi Wireless Mode
ONA-MF-WIFI
|
Infrastructure mode |
|
Wi-Fi Internet Protocol Version
ONA-MF-WIFI
|
IPv4, IPv6 |
Real Time Spectrum Analyzer (Option ONA-SP-RT50/RT100)
|
Frequency range
ONA-SP-RT50, ONA-SP-RT100
|
100 MHz to 6 GHz (Usable from 9 kHz) |
|---|---|
|
Frequency Span
ONA-SP-RT50
|
50 MHz real time |
|
Frequency Span
ONA-SP-RT100
|
100 MHz real time
100 MHz step sequence
|
|
IF Bandwidth
ONA-SP-RT50, ONA-SP-RT100
|
50 MHz or 100 MHz |
|
Resolution Bandwidth
ONA-SP-RT50, ONA-SP-RT100
|
30 kHz to 3 MHz
1-3-10 sequence
|
|
A/D Converter
ONA-SP-RT50, ONA-SP-RT100
|
245.76 Msps |
|
FFT Lengths
ONA-SP-RT50, ONA-SP-RT100
|
8192 |
|
Maximum Acquisition Time
ONA-SP-RT50, ONA-SP-RT100
|
1000 ms |
|
Minimum IQ resolution
ONA-SP-RT50, ONA-SP-RT100
|
8.138 ns |
|
Probability of Intercept (POI)
ONA-SP-RT50, ONA-SP-RT100
|
1.92 μs
Span: 100 MHz
|
|
Spectrum Processing Rate
ONA-SP-RT50, ONA-SP-RT100
|
≤ Max 15,000/s
Persistence Spectrum Display
|
|
Dpx Bitmap Resolution
ONA-SP-RT50, ONA-SP-RT100
|
201 x 801
Persistence Spectrum Display
|
|
Marker Information
ONA-SP-RT50, ONA-SP-RT100
|
Frequency, amplitude, signal density
Persistence Spectrum Display
|
|
Dwell Time Per Step
ONA-SP-RT50, ONA-SP-RT100
|
100 ms to 100 s
Persistence Spectrum Display
|
|
Trace Processing
ONA-SP-RT50, ONA-SP-RT100
|
Color-graded bitmap, +Peak, -Peak, average
Persistence Spectrum Display
|
|
Trace Length
ONA-SP-RT50, ONA-SP-RT100
|
801
Persistence Spectrum Display
|
|
Persistence Spectrogram Trace Detection
ONA-SP-RT50, ONA-SP-RT100
|
+Peak, -Peak, Average (RMS) |
|
Persistence Spectrogram Time Resolution Per Line
ONA-SP-RT50, ONA-SP-RT100
|
100 ms to 1sec, user selectable |
Interference Analyzer (Option ONA-SP-INTAN)
|
Spectrum Analyzer
ONA-SP-INTAN
|
Sound indicator, interference ID, spectrum recorder logging up to 72 hours |
|---|---|
|
Spectrogram
ONA-SP-INTAN
|
Collect up to 72 hours of data |
|
RSSI
ONA-SP-INTAN
|
Collect up to 72 hours of data |
|
Interference Finder
ONA-SP-INTAN
|
Triangulation |
|
Radar Chart
ONA-SP-INTAN
|
Interference Localization |
|
Spectrum replayer
ONA-SP-INTAN
|
Playback recorded data using OneAdvisor 800 |
TDD Auto Gated Spectrum (Option ONA-SP-TAGS)
|
Supported Technology
ONA-SP-TAGS
|
5G NR |
|---|---|
|
Gated Method
ONA-SP-TAGS
|
Gated FFT |
|
Gated Delay range
ONA-SP-TAGS
|
0 to 10 ms
Printed as '0 t 10 ms' in the datasheet
|
|
Gated Length
ONA-SP-TAGS
|
1 to 14 symbols |
|
Trigger Source
ONA-SP-TAGS
|
PSS/SSS |
|
Measurement
ONA-SP-TAGS
|
Spectrum, Spectrogram, Persistent Spectrum, Persistent Spectrogram, RSSI, Interference Finder, Radar Chart |
Gated Sweep (Option ONA-SP-GSS)
|
Gate Method
ONA-SP-GSS
|
Gated FFT |
|---|---|
|
Gated Delay Range
ONA-SP-GSS
|
0 to 100 ms |
|
Gated Length
ONA-SP-GSS
|
1 us to 100 ms |
|
Trigger Source
ONA-SP-GSS
|
Internal, External, GPS |
Route Map (Option ONA-SP-RM)
|
Mode
ONA-SP-RM
|
Spectrum analyzer |
|---|---|
|
Plot Method
ONA-SP-RM
|
Time, position, GPS |
|
Plot Legend
ONA-SP-RM
|
Excellent, very good, good, poor
User definable range
|
|
Map Type
ONA-SP-RM
|
Outdoor (position information embedded), import maps using VIAVI Mapcreator; Indoor (No position information embedded) |
|
Measurement Item
ONA-SP-RM
|
RSSI, ACP |
RFoCPRI Interference Analyzer (Option ONA-SP-CPRI17/8/18)
|
Optical Interface
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
Dual SFP/SFP+ (supports all MSA compliant SFP modules)
Supported with CA5000-F001-O and CA5000-F002-O
|
|---|---|
|
Line rates
ONA-SP-CPRI17
|
CPRI Rate 1 to 7 |
|
Line rates
ONA-SP-CPRI8
|
CPRI Rate 8 |
|
Line rates
ONA-SP-CPRI18
|
CPRI Rate 1 to 8 |
|
Resolution Bandwidth (RBW)
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
10 kHz to 100 kHz with 1-3 step, 7.5 kHz
-3 dB bandwidth
|
|
RBW Accuracy
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
±10% (nominal) |
|
Video Bandwidth (VBW)
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
10 kHz to 100 kHz with 1-3 step, 7.5 kHz
-3 dB bandwidth
|
|
VBW Accuracy
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
±10% (nominal) |
|
CPRI IQ Sample width
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
4 - 20 bits |
|
CPRI Mapping Method
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
1 and 3 |
|
CPRI Bandwidth
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
3.84 MHz x N, where N=1 to 8 |
|
CPRI TX clock
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
Internal, External, Recovered |
|
CPRI Port Type
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
Master, Slave |
|
Link Status
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
LOS, LOF, SDI, RAI, Optic RX Level
Port 1 and Port 2
|
|
SFP Information
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
Wavelength, Vendor, Vendor PN, Vendor Rev, Power level type, Diagnostic byte, Nominal rate, Min rate, Max RX level, Max TX level
Port 1 and Port 2
|
|
Interference Analyzer Measurements
ONA-SP-CPRI17, ONA-SP-CPRI8, ONA-SP-CPRI18
|
Spectrum (Single, Dual, and Quad Chart); Spectrogram (Single and Dual spectrum Chart with 2-D and 3-D waterfall diagram); Interference ID; Sound Indicator; PRB Table; Spectrum Replayer; IQ Activity Scan |
LTE/LTE-A FDD Analyzer
| Frequency Range | Band 1 to 32, 65 to 76, 85, 87, 88 |
|---|---|
| Input Signal Range | -65 to +25 dBm |
| Supported Bandwidth | 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, and 20 MHz |
| Frequency Error |
±10 Hz + ref freq accuracy
99% confidence level
|
|
OTA Measurements
ONA-SP-LTEFDOTA
|
Channel Power, Occupied bandwidth, Spectrum emission, ACLR, Multi-ACLR, Channel Scanner (Up to 6 Carriers), ID Scanner (up to 6 PCI), Control Channel, Frequency Error, Time Error, Time Alignment Error, Route Map, Freq/Time/Power Variation
Option ONA-SP-LTEFDOTA; MBSFN measurement is performed when MBMS is enabled
|
|
Signal Analysis Measurements
ONA-SP-LTEFDSIA
|
Constellation, Subframe, Frame Summary, Data Allocation Map, Power vs. Time (Frame); EVM for PDSCH/Data QPSK, 16 QAM, 64 QAM, 256 QAM; Data EVM RMS, Data EVM peak, Frequency error, Time error, IQ Imbalance
Option ONA-SP-LTEFDSIA
|
LTE/LTE-A TDD Analyzer
| Frequency Range | Band 33 to 53 |
|---|---|
| Input Signal Range | -65 to +25 dBm |
| Supported Bandwidth | 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, and 20 MHz |
| Frequency Error |
±10 Hz + ref freq accuracy
99% confidence level
|
|
OTA Measurements
ONA-SP-LTETDOTA
|
Channel Power, Occupied bandwidth, Spectrum emission, ACLR, Multi-ACLR, Channel Scanner (Up to 6 Carriers), ID Scanner (up to 6 PCI), Control Channel, Frequency Error, Time Error, Time Alignment Error, Route Map, Freq/Time/Power Variation
Option ONA-SP-LTETDOTA; MBSFN measurement is performed when MBMS is enabled
|
|
Signal Analysis Measurements
ONA-SP-LTETDSIA
|
Constellation, Subframe Summary, Frame, Data Allocation Map, Power vs. Time (Frame); EVM for PDSCH/Data QPSK, 16 QAM, 64 QAM, 256 QAM; Data EVM RMS, Data EVM peak, Frequency error, Time error
Option ONA-SP-LTETDSIA
|
5G NR Signal Analyzer
| Frequency Range | FR1: 410 MHz to 6 GHz |
|---|---|
| Input Signal Range | -60 to +25 dBm |
| Supported Bandwidth | 5 MHz, 10 MHz, 15 MHz, 20 MHz, 25 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz, and 100 MHz |
| Frequency Error |
±10 Hz + ref freq accuracy
99% confidence level; -60 dBm to +25 dBm
|
| EVM |
2.0% Typical for QPSK
-60 dBm to +25 dBm; row label not printed in the datasheet
|
|
OTA Measurements
ONA-SP-5GOTA
|
Channel Power (incl. EIRP), Occupied bandwidth, Spectrum emission, ACLR, Carrier Scanner (Up to 8 Carriers), Beam Analyzer (up to 8 beams), Route Map, Freq/Time/Power Variation, Multipath Profile
Option ONA-SP-5GOTA
|
|
Signal Analysis Measurements
ONA-SP-5GSIA
|
Power vs Time (Frame), Power vs Time (Slot), Constellation (PDSCH/Data QPSK, 16QAM, 64QAM, 256QAM EVM; Data EVM RMS, Peak; Frequency error), Allocation Mapper
Option ONA-SP-5GSIA
|
|
Sync Analysis
ONA-SP-CPS
|
Sync Error bar chart (PCI, S-SS RSRP, Sync Error, Time Error, S-SS SINR, S-SS RSRQ); Sync Route Map
Option ONA-SP-CPS
|
DSS Signal Analyzer
| Frequency Range | LTE FDD: Band 1 to 14, 17 to 26; LTE TDD: Band 33 to 43 |
|---|---|
| Minimum Detectable Level |
LTE: -117 dBm; NR: -117 dBm
S-SS RSRP
|
| Input Signal Level | FR1 Band: -70 to +25 dBm |
| Supported Bandwidth | 5 MHz, 10 MHz, 15 MHz, and 20 MHz |
| Frequency Error | ±0.05 ppm with GPS |
| Residual EVM |
3.0 % (typical)
@ -20 dBm
|
|
OTA Measurements
ONA-SP-DSSOTA
|
Channel Power, Occupied Bandwidth, Spectrum Emission Mask, ACLR, Multi-ACLR, Spurious Emission, Power vs. Time (frame), Power vs. Time (Slot), OTA Channel Scanner (up to 3), OTA ID Scanner (up to 6), OTA Multipath Profile, OTA Control Channel, OTA Route map, Freq/Time Error Variation
Option ONA-SP-DSSOTA
|
|
Signal Analysis Measurements
ONA-SP-DSSSIA
|
Constellation, Channel Mapper, Control Channel, Subframe, Frame, Time Alignment Error
Option ONA-SP-DSSSIA
|
NSA Analyzer (Option ONA-SP-NSAOTA)
|
Frequency Range
ONA-SP-NSAOTA
|
LTE-FDD: Band 1 to 14, 17 to 26; LTE-TDD: Band 33 to 43; NR: 410 MHz to 6 GHz |
|---|---|
|
Minimum Detectable Level
ONA-SP-NSAOTA
|
LTE: -117 dBm; NR: -117 dBm
SS-RSRP
|
|
Input Signal Level
ONA-SP-NSAOTA
|
Up to +25 dBm |
|
Supported Bandwidth
ONA-SP-NSAOTA
|
Up to 100 MHz |
|
Frequency Error
ONA-SP-NSAOTA
|
±0.05 ppm with GPS
-60 dBm to +25 dBm
|
|
Residual EVM
ONA-SP-NSAOTA
|
3.0 % (typical)
@ -20 dBm
|
|
Measurements
ONA-SP-NSAOTA
|
NSA Analyzer (Up to 8 LTE/NR carriers; Fast mode: Strongest PCI; Normal mode: Multi PCIs), NSA Scanner (Up to 8 LTE/NR carriers), Route map |
RAN Analyzer (Option ONA-SP-5GRAN)
|
Measurements
ONA-SP-5GRAN
|
5G NR Signal Analysis (Beam Analyzer, Freq/Time/Power Variation, Allocation Mapper); Real-time Spectrum Analysis (RtSA Persistent Spectrum, RtSA Persistent Spectrogram); TDD Auto Gated Spectrum (TAGS Spectrum, TAGS Spectrogram, TAGS Persistent Spectrum, TAGS Persistent Spectrogram) |
|---|
GSM/GPRS/EDGE Signal Analyzer
| Frequency range | 450 MHz to 500 MHz; 820 MHz to 965 MHz; 1700 MHz to 1995 MHz |
|---|---|
| Input signal range |
-40 to +25 dBm
Except output of spectrum
|
| Burst power | ±1.0 dB |
| Frequency error |
±10 Hz + frequency reference accuracy
99% confidence level
|
| GMSK Phase RMS accuracy |
±1.5 degrees
(0 < Phase RMS < 8)
|
| GMSK Residual error | 2 degrees (typical) |
| GMSK Phase peak accuracy |
±2.5 degrees
(0 < Phase peak < 20)
|
| 8 PSK EVM accuracy |
±1.5%
(2% < EVM < 8%)
|
| 8 PSK Residual error | 2.5% |
| 8 PSK RF power vs. time | ±0.25 symbol |
|
OTA Measurements
ONA-SP-GSMOTA
|
Channel Power, Occupied Bandwidth, Spectrum Emission Mask, Spurious Emissions, Channel Scanner, Frequency Scanner, Multipath Profile, Modulation Analyzer
Option ONA-SP-GSMOTA
|
|
Signal Analysis Measurements
ONA-SP-GSMSIA
|
Power vs. Time (slot), Power vs. Time (frame), Constellation
Option ONA-SP-GSMSIA; EVM RMS, EVM Peak, EVM 95th, I/Q origin offset and C/I performed for 8PSK modulation signals (EDGE) only
|
Blind Scanner (Option ONA-SP-BS)
|
Frequency Range
ONA-SP-BS
|
LTE-FDD: Band 1 to 14, 17 to 26; LTE-TDD: Band 33 to 43; NR: 410 MHz to 6 GHz |
|---|---|
|
Minimum Detectable Level
ONA-SP-BS
|
LTE: -111 dBm; NR: -115 dBm
SS-RSRP
|
|
Input Signal Level
ONA-SP-BS
|
Up to +25 dBm |
|
Supported Bandwidth
ONA-SP-BS
|
Up to 100 MHz |
|
SCS
ONA-SP-BS
|
NR: 15 kHz and 30 kHz; LTE & DSS: 15 kHz |
|
CP Type for LTE
ONA-SP-BS
|
Normal and Extended |
|
Frame Period for NR and DSS
ONA-SP-BS
|
5, 10, 20, 40, 80, 160 ms |
|
Measurements
ONA-SP-BS
|
NR: SSB Frequency, SS-RSRP, MCC/MNC, Cell-ID; LTE: Carrier Frequency, Carrier Bandwidth, SS-RSRP, Duplex type, MCC/MNC, Cell-ID; DSS: Carrier Frequency, Carrier Bandwidth, SSB Frequency, SS-RSRP, Duplex type, MCC/MNC, Cell-ID
NR MCC/MNC and Cell-ID in 5G NR StandAlone mode only
|
On-line Route Map (Option ONA-SP-ORM)
|
Supported mode
ONA-SP-ORM
|
LTE-FDD Analyzer, 5G NR, NSA Analyzer, DSS Signal Analyzer, Spectrum Analyzer, Interference Analyzer, TDD Auto Gated Spectrum, Real Time Spectrum Analyzer, Channel Scanner |
|---|---|
|
Operation Mode
ONA-SP-ORM
|
On-line map: Seamless map update; Off-line map: limited to predefined area, up to 5 steps Zoom level |
|
Map type
ONA-SP-ORM
|
Open Street Map |
EMF Analyzer (Option ONA-SP-EMF-SA)
|
Supported Antenna
ONA-SP-EMF-SA
|
G700050381: 400 MHz to 6 GHz Isotropic Antenna (VIAVI); G700050366: 650 MHz - 4 GHz (VIAVI); G700050367: 650 MHz - 6 GHz (VIAVI); USLP9143: 300 MHz - 7 GHz (Schwarzbeck); USLP9143B: 200 MHz - 7 GHz (Schwarzbeck); USLP9142: 800 MHz - 5 GHz (Schwarzbeck) |
|---|---|
|
Measurement Time
ONA-SP-EMF-SA
|
1 - 60 minutes |
|
Dwell Time
ONA-SP-EMF-SA
|
1 - 60 seconds |
|
Units
ONA-SP-EMF-SA
|
dBμV/m, dBmV/m, dBV/m, V/m, W/m2, dBm/m2, A/m, dBA/m, mW/cm2, % |
|
Frequency error
ONA-SP-EMF-SA
|
±10 Hz + ref freq accuracy
99% confidence level
|
|
Limit
ONA-SP-EMF-SA
|
ICNIRP 2020 Occupational, ICNIRP 2020 General Public, ARPANSA Occupational, ARPANSA General Public, BGV B11 Exposure area 1, 26. BlmSchV General Public, FCC 1997 Occupational, FCC 1997 General Public, ICNIRP 1998 Occupational, ICNIRP 1998 General Public, IEEE C95.1 2005 Upper Tier, IEEE C95.1 2005 General Public, Italy CM 2003 Exposure, Italy CM 2003 Attention, Safety Code 6 (2015) Uncontrolled, Safety Code 6 (2015) Controlled, Safety Code 6 (2009) Uncontrolled, Safety Code 6 (2009) Controlled, Safety Code 6 (99-EHD-237) Exposed Workers, Safety Code 6 (99-EHD-237) General Public |
|
Measurements
ONA-SP-EMF-SA
|
Spectrum (Integrated Power): Isotropic EMF Power, Accumulated Isotropic EMF Power: AVG, MAX, MIN; Scanner: EMF Power of multiple frequency bands, Chart view, Table view
Isotropic measurements require Isotropic Antenna G700050381
|
5G NR EMF Analyzer (Options ONA-SP-EMF-SA, ONA-SP-EMF-NR or ONA-SP-5GOTA)
|
Frequency Range
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
FR1 Band, Antenna dependent |
|---|---|
|
Input Signal Range
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
-60 to +25 dBm |
|
Supported Bandwidth
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
5 MHz, 10 MHz, 15 MHz, 20 MHz, 25 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz, and 100 MHz |
|
Measurement Time
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
1 - 60 minutes |
|
Dwell Time
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
1 - 60 seconds |
|
Measurements
ONA-SP-EMF-SA, ONA-SP-EMF-NR, ONA-SP-5GOTA
|
Beam: PCI, RSRP, Extrapolated RSRP; EMF Power: Extrapolated Isotropic EMF Power, Extrapolated Accumulated Isotropic EMF Power: AVG, MAX, MIN
Isotropic measurements require Isotropic Antenna G700050381
|
Channel Scanner (Option ONA-SP-CHSC)
|
Frequency Range
ONA-SP-CHSC
|
10 MHz to 6GHz |
|---|---|
|
Measurement Range
ONA-SP-CHSC
|
-110 to +25 dBm |
|
Measurements
ONA-SP-CHSC
|
Channel Scanner, Frequency Scanner, Custom Scanner |
Ethernet
|
Test Interface / Bit Rate
ONA-SP-10M1GE
|
10M/100M/1GE LAN
Option ONA-SP-10M1GE
|
|---|---|
|
Test Interface / Bit Rate
ONA-SP-10GE
|
10GigE LAN
Option ONA-SP-10GE
|
|
Test Interface / Bit Rate
ONA-SP-25GE
|
25GE LAN
Option ONA-SP-25GE
|
|
Test Interface / Bit Rate
ONA-SP-100GE
|
100GE LAN
Option ONA-SP-100GE
|
| Interface Type, 10M-1GE/10GE/25GE LAN | SFP/SFP+/SFP28: Port 1 |
| Interface Type, 100GE LAN | QSFP: Port 1 |
| Traffic | Line Rate Traffic Tx and RX for all Interfaces |
| Single Stream Generation/Analysis | Layer 2; Layer 3 (IPv4) |
| Modes Of Operation | Terminate, Loopback |
| Timing | Recovered from Rx, Internal (Stratum 3), Recovered from External |
| Ethernet and IP Layer | Layer 2 (802.3 and DIX), Layer 3 (IPv4), VLAN (Single tag) |
| Workflows | RFC 2544, Y.1564, QuickCheck, Optics Self-Test |
| Measurements | Throughput, Frame Loss, Roundtrip Delay, Packet Jitter |
IEEE 1588v2 PTP (Option ONA-SP-10G1588 / ONA-SP-25G1588)
|
Interfaces
ONA-SP-10G1588, ONA-SP-25G1588
|
10G, and 25G Tx/Rx |
|---|---|
|
IP Versions
ONA-SP-10G1588, ONA-SP-25G1588
|
IPv4 and IPv6 |
|
Emulation
ONA-SP-10G1588, ONA-SP-25G1588
|
1588v2 Master Emulation 1-step and 2-step; 1588v2 Slave Emulation |
|
Encapsulations supported
ONA-SP-10G1588, ONA-SP-25G1588
|
None, VLAN, and Q-in-Q |
|
Messaging
ONA-SP-10G1588, ONA-SP-25G1588
|
Layer 2 1588v2 Messaging; Layer 4 1588v2 Messaging for IPv4 |
|
Message rates Multicast
ONA-SP-10G1588, ONA-SP-25G1588
|
fastest 2/16/64/64 (DelayResponse/Announce/Sync/DelayRequest); slowest one message every 16 seconds |
|
Message rates Unicast
ONA-SP-10G1588, ONA-SP-25G1588
|
fastest 2/16/16/16 (DelayResponse/Announce/Sync/DelayRequest); slowest one message every 16 seconds |
|
Address Modes
ONA-SP-10G1588, ONA-SP-25G1588
|
Unicast and Multicast Address Mode; Forwardable and Non-forwardable Address; Static unicast message negotiation: ON or OFF |
|
Master Mode Clock Classes Supported
ONA-SP-10G1588, ONA-SP-25G1588
|
Primary, Primary Holdover, Arbitrary, Arbitrary Holdover, Primary A, Arbitrary A |
|
Delay Measurements
ONA-SP-10G1588, ONA-SP-25G1588
|
1588v2 Delay Measurements (Master/Slave); One-way (Master to Slave and Slave to Master) Delay; Differential Delay and Delay Asymmetry Measurements
Requires Precision Timing Reference Module
|
|
Time Error Measurements
ONA-SP-10G1588, ONA-SP-25G1588
|
Time Error Measurements (1ns resolution); max |TE| Measurement; cTE Measurement; Wander Analysis of Time Error Measurement; Automated Time Error Measurement workflow |
|
Enhanced PTP analysis
ONA-SP-10G1588, ONA-SP-25G1588
|
Floor packet analysis, Extended runtime, Noise Floor Reduction, User Specified Ethernet Cable Delay, cTE Calculation |
|
PTP Check
ONA-SP-10G1588, ONA-SP-25G1588
|
Workflow to automate getting PTP Time Error results; available for G.8275.1 layer 2 and layer 4; 10GE, and 25GE |
|
Standards
ONA-SP-10G1588, ONA-SP-25G1588
|
Testing can be performed as per G.8265.1, G.8275.1, G.8275.2 |
IPv6 (Option ONA-SP-IPv6)
|
Interfaces
ONA-SP-IPv6
|
10G, and 25G Tx/Rx |
|---|---|
|
Statistics
ONA-SP-IPv6
|
Util % stats, Packet Rate, Packet Size, Tx/Rx Mbps at L3 |
|
Link Stats
ONA-SP-IPv6
|
Tx/Rx Packet Counts, Tx Router Solicitations, Rx Router Advertisements, Unicast Packets, Multicast Packets, Binned sized packets in categories |
|
Errors
ONA-SP-IPv6
|
IP Packet Length Errors, Acterna Payload Errors, Packet Error Rate, Lost Frames, Frame Loss Ratio, Out of Sequence Frames |
|
Graphs
ONA-SP-IPv6
|
Throughput, Frame Loss, Packet Jitter, Latency, Errors |
|
NDP Support
ONA-SP-IPv6
|
Manual, Stateful, Stateless |
|
Payload Type
ONA-SP-IPv6
|
ATPv3 (Acterna Test Payload), Fill Byte |
|
IPv6 5G NR Discovery
ONA-SP-IPv6
|
Discover MAC Address, VLAN ID, IPv6 addresses over 10 GE and 25 GE interfaces |
|
IP (Layer 3) Traffic Filtering
ONA-SP-IPv6
|
Destination address, Source address, Source Subnet mask, TOS/DSCP fields (IPv4), Protocol (IPv4), IPv6 Traffic Class, IPv6 Next Header, Payload analysis on/off |
Capture/Decode (Option ONA-SP-1GECAP / ONA-SP-10GECAP / ONA-SP-25GECAP)
|
Interfaces
ONA-SP-1GECAP, ONA-SP-10GECAP, ONA-SP-25GECAP
|
1G, 10G, and 25G Tx/Rx |
|---|---|
|
Capture
ONA-SP-1GECAP, ONA-SP-10GECAP, ONA-SP-25GECAP
|
Wirespeed Capture; Tx and Rx Capture; Triggers and filters; Frame Slicing
Captures traffic on the test interface receiver and transmitter
|
|
Capture Buffer
ONA-SP-1GECAP, ONA-SP-10GECAP, ONA-SP-25GECAP
|
256MB |
|
Decode
ONA-SP-1GECAP, ONA-SP-10GECAP, ONA-SP-25GECAP
|
Integrated Wireshark on the TestSet
Viewing capture files can be performed directly on the test set and not require a separate laptop/PC
|
BERT (Option ONA-SP-CPRI18L2)
|
CPRI
ONA-SP-CPRI18L2
|
All rate from 1 to 8 |
|---|---|
|
Results
ONA-SP-CPRI18L2
|
Pattern Losses, Pattern Loss Seconds, Bit Errors, Bit Error Rate, Bit Error Seconds, Bit Error-Free Seconds, Bit Error-Free Seconds, % |
General
| RF In Connector Type | Type-N, female |
|---|---|
| RF In Impedance |
50 Ω
Nominal
|
| RF In Damage Level |
+33 dBm, ±50 VDC
Average CW power
|
| GNSS Connector Type | SMA, female |
| GNSS Impedance |
50 Ω
Nominal
|
| Ext. Ref In and Trigger In/Out Connector Type | SMB, female |
| Ext. Ref In and Trigger In/Out Impedance |
50 Ω
Nominal
|
| Ext. Ref In Frequency | 10 MHz, 13 MHz, 15 MHz |
| Ext. Ref In Input Range | -5 to +5 dBm |
|
SFP Cage
SPA06MA-O
|
SFP+: 3 ports; QSFP: 2 ports
Datasheet marks the SFP cage as SPA06MA-O only
|
|
Battery Operation
SPA06MA-O
|
> 2.0 hours
Spectrum mode with 30% LCD brightness
|
| Weight | < 1.4 kg (3.0 lb.) |
| Size (W x H x D) | 269mm X 170mm X 41mm with bumper |
| Recommended calibration cycle | 1 year |
Specifications are taken from the manufacturer's documentation. See the datasheet for complete and current values.
Applications
- RF spectrum assessment and interference analysis
- Automated interference detection with TDD Auto Gated Spectrum (TAGS) technology and Interference Advisor
- PIM detection of any CPRI-based radio with RFoCPRI technology
- Radio installation testing for any cell site, including coax and fiber cable testing
- Open RAN O-DU emulation and radio validation during installation
- Fronthaul transport and synchronization (IEEE 1588) verification
- 5G NR and LTE over-the-air signal coverage and quality measurement
- EMF exposure measurement
Options & Accessories
| Option | Description |
|---|---|
| ONA-SP-GSS | Gated Sweep — Gated FFT sweep, gated delay 0 to 100 ms, gated length 1 us to 100 ms; internal, external or GPS trigger. |
| ONA-SP-GNSS | GPS Connectivity with Antenna — Built-in GPS receiver with SMA antenna, GPS lock frequency accuracy ±25 ppb. |
| ONA-MF-BT | Bluetooth Connectivity — Built-in Bluetooth, PAN and FTP profiles. |
| ONA-MF-WIFI | Wi-Fi Connectivity — Built-in IEEE 802.11 a/b/g/n/ac, infrastructure mode, IPv4/IPv6. |
| ONA-SP-RT50 | Real Time Spectrum Analyzer, 50 MHz — 50 MHz real-time span with persistence spectrum and spectrogram displays. |
| ONA-SP-RT100 | Real Time Spectrum Analyzer, 100 MHz — 100 MHz real-time span with persistence spectrum and spectrogram displays. |
| ONA-SP-INTAN | Interference Analyzer — Spectrogram, RSSI and spectrum recording up to 72 hours, interference finder triangulation, radar chart, spectrum replayer. |
| ONA-SP-TAGS | TDD Auto Gated Spectrum — Gated FFT spectrum for 5G NR triggered on PSS/SSS, gated length 1 to 14 symbols. |
| ONA-SP-RM | Route Map — Spectrum analyzer RSSI and ACP plotted by time, position or GPS on indoor or outdoor maps. |
| ONA-SP-CPRI17 | RFoCPRI Interference Analyzer, CPRI Rate 1 to 7 |
| ONA-SP-CPRI8 | RFoCPRI Interference Analyzer, CPRI Rate 8 |
| ONA-SP-CPRI18 | RFoCPRI Interference Analyzer, CPRI Rate 1 to 8 |
| ONA-SP-LTEFDOTA | LTE/LTE-A FDD Analyzer, OTA Measurements |
| ONA-SP-LTEFDSIA | LTE/LTE-A FDD Analyzer, Signal Analysis Measurements |
| ONA-SP-LTETDOTA | LTE/LTE-A TDD Analyzer, OTA Measurements |
| ONA-SP-LTETDSIA | LTE/LTE-A TDD Analyzer, Signal Analysis Measurements |
| ONA-SP-5GOTA | 5G NR Signal Analyzer, OTA Measurements — Channel power, OBW, SEM, ACLR, carrier scanner (up to 8 carriers), beam analyzer (up to 8 beams), route map, multipath profile. |
| ONA-SP-5GSIA | 5G NR Signal Analyzer, Signal Analysis Measurements — Power vs time (frame/slot), constellation with PDSCH EVM, allocation mapper. |
| ONA-SP-CPS | 5G NR Sync Analysis — Sync error bar chart and sync route map. |
| ONA-SP-DSSOTA | DSS Signal Analyzer, OTA Measurements |
| ONA-SP-DSSSIA | DSS Signal Analyzer, Signal Analysis Measurements |
| ONA-SP-NSAOTA | NSA Analyzer — Up to 8 LTE/NR carriers, NSA analyzer, NSA scanner and route map. |
| ONA-SP-5GRAN | RAN Analyzer — Combined 5G NR signal analysis, real-time spectrum analysis and TDD Auto Gated Spectrum measurements. |
| ONA-SP-GSMOTA | GSM/GPRS/EDGE Signal Analyzer, OTA Measurements |
| ONA-SP-GSMSIA | GSM/GPRS/EDGE Signal Analyzer, Signal Analysis Measurements |
| ONA-SP-BS | Blind Scanner — Scans LTE-FDD, LTE-TDD, NR and DSS carriers for frequency, bandwidth, SS-RSRP, MCC/MNC and Cell-ID. |
| ONA-SP-ORM | On-line Route Map — Open Street Map based route mapping with on-line and off-line map modes. |
| ONA-SP-EMF-SA | EMF Analyzer — Spectrum-based EMF power measurement with isotropic antenna support and built-in exposure limit standards. |
| ONA-SP-EMF-NR | 5G NR EMF Analyzer — Beam-based extrapolated EMF power measurement for 5G NR FR1. |
| ONA-SP-CHSC | Channel Scanner — Channel, frequency and custom scanner, 10 MHz to 6 GHz, -110 to +25 dBm. |
| ONA-SP-10M1GE | 10M/100M/1GE LAN Ethernet Test Interface |
| ONA-SP-10GE | 10GigE LAN Ethernet Test Interface |
| ONA-SP-25GE | 25GE LAN Ethernet Test Interface |
| ONA-SP-100GE | 100GE LAN Ethernet Test Interface |
| ONA-SP-10G1588 | IEEE 1588v2 PTP, 10G — PTP master and slave emulation, delay and time error measurements, PTP Check. |
| ONA-SP-25G1588 | IEEE 1588v2 PTP, 25G — PTP master and slave emulation, delay and time error measurements, PTP Check. |
| ONA-SP-IPv6 | IPv6 — IPv6 traffic generation and analysis on 10G and 25G interfaces, including IPv6 5G NR discovery. |
| ONA-SP-1GECAP | Capture/Decode, 1G — Wire-speed capture with 256MB buffer and integrated Wireshark. |
| ONA-SP-10GECAP | Capture/Decode, 10G — Wire-speed capture with 256MB buffer and integrated Wireshark. |
| ONA-SP-25GECAP | Capture/Decode, 25G — Wire-speed capture with 256MB buffer and integrated Wireshark. |
| ONA-SP-CPRI18L2 | BERT, CPRI Rate 1 to 8 |
| CA5000-F001-O | Optical interface support for RFoCPRI Interference Analyzer |
| CA5000-F002-O | Optical interface support for RFoCPRI Interference Analyzer |
| G700050381 | 400 MHz to 6 GHz Isotropic Antenna (VIAVI) — Required for isotropic EMF power measurements. |
| G700050366 | 650 MHz - 4 GHz Antenna (VIAVI) |
| G700050367 | 650 MHz - 6 GHz Antenna (VIAVI) |
