ME7803NR RF Regulatory Test System for 5G NR TRCC/RED/CFR FR1 Tests
5G NR RF test system for TRCC/RED/CFR FR1 regulatory tests of mobile terminals according to national and regional radio regulations.
- System
- 5G NR
- Electrical Performance
- Depends on the performance of each piece of equipment in the configured system
Overview
The Anritsu RF Regulatory Test System ME7803NR runs 5G NR RF regulatory tests based on national and regional radio regulations. It supports the TRCC, RED and CFR FR1 tests of 5G NR terminals defined by ARIB, ETSI and FCC. Anritsu states that future changes and updates to these tests will also be supported. Settings and scenarios are provided for each test type, so the system can check whether the UE under test meets the legal requirements.
System configuration
The system is built from the Radio Communication Test Station MT8000A, which simulates a 5G NR base station, and the Radio Communication Analyzer MT8821C, which acts as the LTE Anchor. Other measuring instruments and dedicated software complete the setup. Together they run conducted (wired) 5G RF regulatory tests over 5G NR Non-Standalone (NSA) call connections. The system does not support 4G RF (LTE) tests. 5G NR Standalone (SA) tests are planned for a future upgrade. The ME7803NR can be combined with Anritsu equipment the customer already owns, such as the MT8000A, MT8821C, MS2840A/MS2850A, MG3710E and MG3694C, so only the missing hardware needs to be added.
Frequency bands
The system supports the certified 5G NR bands, and the LTE bands used in 5G NSA mode, that are deployed or about to be deployed in North America, Europe and Asia. Bands that are not yet supported will be added according to market requirements.
Correction, calibration and software
Anritsu recommends calibration at the start of testing for stable, reliable results. Navigation screens guide the operator through correction, calibration and connection switching. In the test software, a test sequence is built by choosing test cases and editing common and per-test-case parameters. The software shows test progress, keeps logs of the messages exchanged with the UE for troubleshooting, and saves results as PDF reports or CSV files.
Key Features
- Supports ARIB/ETSI/FCC-defined 5G RF Regulatory (TRCC/RED/CFR) FR1 tests
- End-to-end solution with easy test sequence creation and editing capabilities
- Supports N. America, Europe, and Asia national approved bands (5G NR Bands)
- Correction/calibration functions for improving the reliability of measured results
- Compatible with existing Anritsu instruments (MT8000A, MT8821C, MS2840A/MS2850A, MG3710E, MG3694C)
- Supports conducted tests
- 5G NR Non-Standalone (NSA) call connections
- Navigation screens for correction/calibration and connection switching
- Measurement results saved as PDF reports or CSV files
- Message logs between tester and UE for troubleshooting
Specifications
| System | 5G NR |
|---|---|
| Electrical Performance |
Depends on the performance of each piece of equipment in the configured system
Read the equipment catalogs.
|
| TRCC (Japan Regulatory) |
Article 2-1-11-30
Contact Anritsu for details about versions supporting each standard.
|
|---|---|
| RED (ETSI) | ETSI EN 301 908-25 |
| CFR (FCC) |
Title 47 CFR part 2 (common), Part 22, Part 24, Part 27 (FR1)
Printed as "Tille47" in the brochure.
|
| Voltage | 100 VAC to 120 VAC, or 200 VAC to 240 VAC |
|---|---|
| Frequency | 50 Hz/60 Hz |
| Power Consumption |
≤4500 VA
Max configuration. Read the catalog for the power consumption of each piece of test equipment.
|
| Operating |
18°C to 28°C
These conditions must be satisfied at calibration; calibration in an air-conditioned room is recommended.
|
|---|---|
| Storage | 10°C to 60°C |
| Band 77 | UL 3300 to 4200 / DL 3300 to 4200 |
|---|---|
| Band 78 | UL 3300 to 3800 / DL 3300 to 3800 |
| Band 79 | UL 4400 to 5000 / DL 4400 to 5000 |
| Band 1 | UL 1920 to 1980 / DL 2110 to 2170 |
|---|---|
| Band 3 | UL 1710 to 1785 / DL 1805 to 1880 |
| Band 7 | UL 2500 to 2570 / DL 2620 to 2690 |
| Band 8 | UL 880 to 915 / DL 925 to 960 |
| Band 20 | UL 832 to 862 / DL 791 to 821 |
| Band 28 | UL 703 to 748 / DL 758 to 803 |
| Band 38 | UL 2570 to 2620 / DL 2570 to 2620 |
| Band 40 | UL 2300 to 2400 / DL 2300 to 2400 |
| Band 41 | UL 2496 to 2690 / DL 2496 to 2690 |
| Band 50 | UL 1432 to 1517 / DL 1432 to 1517 |
| Band 51 | UL 1427 to 1432 / DL 1427 to 1432 |
| Band 77 | UL 3300 to 4200 / DL 3300 to 4200 |
| Band 78 | UL 3300 to 3800 / DL 3300 to 3800 |
| Band 5 | UL 824 to 849 / DL 869 to 894 |
|---|---|
| Band 41 | UL 2496 to 2690 / DL 2496 to 2690 |
| Band 71 | UL 663 to 698 / DL 617 to 652 |
| Band 1 | UL 1920 to 1980 / DL 2110 to 2170 |
|---|---|
| Band 2 | UL 1850 to 1910 / DL 1930 to 1990 |
| Band 3 | UL 1710 to 1785 / DL 1805 to 1880 |
| Band 4 | UL 1710 to 1755 / DL 2110 to 2155 |
| Band 5 | UL 824 to 849 / DL 869 to 894 |
| Band 6 | UL 830 to 840 / DL 875 to 885 |
| Band 7 | UL 2500 to 2570 / DL 2620 to 2690 |
| Band 8 | UL 880 to 915 / DL 925 to 960 |
| Band 9 | UL 1749.9 to 1784.9 / DL 1844.9 to 1879.9 |
| Band 10 | UL 1710 to 1770 / DL 2110 to 2170 |
| Band 11 | UL 1427.9 to 1447.9 / DL 1475.9 to 1495.9 |
| Band 12 | UL 698 to 716 / DL 728 to 746 |
| Band 13 | UL 777 to 787 / DL 746 to 756 |
| Band 14 | UL 788 to 798 / DL 758 to 768 |
| Band 17 | UL 704 to 716 / DL 734 to 746 |
| Band 18 | UL 815 to 830 / DL 860 to 875 |
| Band 19 | UL 830 to 845 / DL 875 to 890 |
| Band 20 | UL 832 to 862 / DL 791 to 821 |
| Band 21 | UL 1447.9 to 1462.9 / DL 1495.9 to 1510.9 |
| Band 24 | UL 1626.5 to 1660.5 / DL 1525 to 1559 |
| Band 25 | UL 1850 to 1915 / DL 1930 to 1995 |
| Band 26 | UL 814 to 849 / DL 859 to 894 |
| Band 27 | UL 807 to 824 / DL 852 to 869 |
| Band 28 | UL 703 to 748 / DL 758 to 803 |
| Band 30 | UL 2305 to 2315 / DL 2350 to 2360 |
| Band 31 | UL 452.5 to 457.5 / DL 462.4 to 467.5 |
| Band 33 | UL 1900 to 1920 / DL 1900 to 1920 |
| Band 34 | UL 2010 to 2025 / DL 2010 to 2025 |
| Band 35 | UL 1850 to 1910 / DL 1850 to 1910 |
| Band 36 | UL 1930 to 1990 / DL 1930 to 1990 |
| Band 37 | UL 1910 to 1930 / DL 1910 to 1930 |
| Band 38 | UL 2570 to 2620 / DL 2570 to 2620 |
| Band 39 | UL 1880 to 1920 / DL 1880 to 1920 |
| Band 40 | UL 2300 to 2400 / DL 2300 to 2400 |
| Band 41 | UL 2496 to 2690 / DL 2496 to 2690 |
| Band 42 | UL 3400 to 3600 / DL 3400 to 3600 |
| Band 66 | UL 1710 to 1780 / DL 2110 to 2200 |
| PC Controller | Controls overall system |
|---|---|
| Vector Signal Generator MG3710E | Outputs interference waveforms and adjacent-channel signals |
| Signal Analyzer MS2840A/MS2850A | Analyzes UE-under-test signal |
| 2 GHz - 40 GHz Signal Generator MG3694C |
Outputs CW signal for calibrating interference waveforms and system
The web page lists this instrument as MG3694.
|
| Radio Communication Analyzer MT8821C | Operates as base station simulating LTE Anchor |
| Radio Communication Test Station MT8000A | Operates as simulated 5G NR base station |
| Additional required items |
Power sensor and power meter, Ethernet HUB, cables, couplers, and test SIM card
Power sensor and power meter are required to assure system measurement accuracy.
|
Applications
- 5G NR RF regulatory testing
- TRCC certification testing (Japan)
- RED testing for CE (Europe)
- CFR testing for FCC (United States)
- 5G NR mobile terminal testing
Included
- ME7803NR Instruction Manual (DVD-ROM)
Options & Accessories
| Option | Description |
|---|---|
| MX780300NR | Platform Functionality — No order required because built-in as standard |
| MX780302NR | RED Test Software for CE |
| MX780303NR | CFR Test Software for FCC |
| MX780304NR | TRCC Test Software for Japan Regulatory |
| ME7803NR-AK001 | Accessory Kit for FR1 (In-band) |
| ME7803NR-AK002 | Accessory Kit for FR1 (spurious) |
| ME7803NR-AK011 | Accessory Kit for FR1 Correction (In-band) |
| ME7803NR-AK012 | Accessory Kit for FR1 Correction (spurious/interferer) |
| Z2102A | HPF (1700 MHz to 5000 MHz) |
| Z2103A | HPF (3000 MHz to 7000 MHz) |
| Z2104A | LPF (DC to 2200 MHz) |
| J1839A | Coaxial Adapter (K-P, K-J) |
| Z2091A | GPIB-Ethernet Converter |
| Z2114A | Control PC (EN) |
| Z2090A | Ethernet Hub |
| MT8000A | Radio Communication Test Station — Ancillary equipment |
| MT8821C | Radio Communication Analyzer — Ancillary equipment |
| MG3694C | 2 GHz - 40 GHz Signal Generator — Ancillary equipment |
| MG3710E | Vector Signal Generator — Ancillary equipment |
| MS2840A | Signal Analyzer — Ancillary equipment; choose either MS2840A or MS2850A |
| MS2850A | Signal Analyzer — Ancillary equipment; choose either MS2840A or MS2850A |
| ML2437A | POWER METER — Ancillary equipment |
| MA2444D | High Accuracy Sensor — Ancillary equipment |
Documents & Resources
Related Products
Vector signal generator covering 100 kHz to 2.7/4/6 GHz, with up to 160 MHz built-in baseband generation and optional dual RF outputs.
Benchtop spectrum and signal analyzer covering 9 kHz to 44.5 GHz with low close-in SSB phase noise and an optional built-in signal generator.
Benchtop signal/spectrum analyzer covering 9 kHz to 32 GHz or 44.5 GHz with up to 1 GHz analysis bandwidth for 5G and satellite signals.
All-in-one 5G NR test platform with base station emulation for RF, protocol and application tests across FR1, FR2 and FR3 (to 16 GHz).
Multi-RAT test platform for 3GPP protocol conformance and carrier acceptance testing of 5G NR, LTE and W-CDMA mobile devices.
5G NR RF/RRM conformance test system for standalone and non-standalone mode, covering FR1 and FR2 bands, GCF and PTCRB certified.
One-box base station simulator for UE RF TRX and functional testing from LTE-Advanced and NB-IoT to 3G/2G, 30 MHz to 6 GHz.